Extron Cable Cubby 1202 Template

SURFACE

CUT-OUT

AREA

(102 mm)

10"

(254 mm)

” (1.5 mm)

Cut-Out Template for the Extron

Cable Cubby 1202

1. Confirm the product to be installed.

2. Remove the surface cut-out area

(gray) from the template.

3. Measure the cutout and template.

4. Mark the position on the

furniture where the Cable Cubby 1202

will be installed.

5. Double check dimensions and position,

then cut the opening.

User Access

P/N 68-3105-02 Rev. A

Page Size: 11" x 17"

Print Scale 1:1

Do not Shrink

Trim Ring

Lip

Side Clamps

" (6 mm) R

Trim Ring’s Outer Edge

(Do not cut this line.)

This manual is also suitable for