Troy-Bilt 12A-466M011 Fast Start Guide

Type
Fast Start Guide

This manual is also suitable for

Read and understand all instruction, warning, and danger labels.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND
FOLLOW THE SAFE OPERATION PRACTICES BEFORE OPERATING .
Lea el manual de operación anexo sobre ensamblaje e inicio.
Need Help? Call 1-888-TO-HELP-U (1-888-864-3578)
Use cable
tie to secure
cables to
lower handle.
1
2
3
4
Refer to Operator’s Manual for instructions on attaching the grass catcher.
12AI869 © 2008
778-11676
Starter
Rope
Blade Control
Handle
Star Knobs
(A) Hold
blade control
handle
against upper
handle.
(B) Slowly
pull starter
rope from
engine.
(C) Slip
starter rope
into rope guide.
(D) Tighten rope guide wing knob.
(A) Lift handle
to extended
position.
(B) Tighten star
knobs.
A
C
D
B
(A) Move
hairpin clip to
inside hole
(hole closest
to handle).
(B) Insert
carriage bolt
and tighten
with wing
nut. Repeat
on opposite
side.
A
B
A
B
B
Read and understand all instruction, warning, and danger labels.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND
FOLLOW THE SAFE OPERATION PRACTICES BEFORE OPERATING .
Lea el manual de operación anexo sobre ensamblaje e inicio.
Need Help?
Call 1-888-TO-HELP-U
Lea el manual de operación anexo sobre ensamblaje e inicio.
Fill tank with gas up to within 1/2-inch
of top of tank. Do not overll.
Fill engine with entire contents of oil bottle
supplied. Do not overll.
5
6
Gas Cap
Oil Fill
Need Help?
Call 1-888-TO-HELP-U
Depress blade control handle and hold.
8
7
Pull starter rope with quick, full arm stroke. If
engine does not start after three attempts, wait
a few minutes and repeat steps 7 through 8.
  • Page 1 1
  • Page 2 2

Troy-Bilt 12A-466M011 Fast Start Guide

Type
Fast Start Guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI