V2.00 - Installation Instructions, Specifications and Project Plans are effective 12/6/2016 . This information is updated periodically
and should not be relied upon after 2 years from 12/6/2016 . Please visit OZCOBP.com to get current information.
56621 & 86621
1-1/2" Hex Cap Nuts
Installation Instructions,
1-1/2" Hex Cap Nuts
Dome Cap Nuts
1" Hex Cap Nuts
1
Installation Instructions, Cap Nuts
56622 & 86622
Dome Cap Nuts
All Cap Nuts function the same
Hex Cap Nuts are standard on most products.
Dome Cap Nuts are standard on hinges.
Either are suitable in place of one another plus a variety of other uses.
Increased holding power of fasteners with additional surface area.
56681 & 86681
1" Hex Cap Nuts
V2.00 - Installation Instructions, Specifications and Project Plans are effective 12/6/2016 . This information is updated periodically
and should not be relied upon after 2 years from 12/6/2016 . Please visit OZCOBP.com to get current information.
Suggested Tools
(others may be required)
3
Installation Instructions, Cap Nuts
V2.00 - Installation Instructions, Specifications and Project Plans are effective 12/6/2016 . This information is updated periodically
and should not be relied upon after 2 years from 12/6/2016 . Please visit OZCOBP.com to get current information.
Recommneded Fastener:
OWT Timber Screws
Tool required
3/8" Driver (not
included)
step 1
securing
fastener (not
included)
step 2
securing
Cap
finger tight
1-1/2" Hex Cap Nut Installation
Installation Instructions, Cap Nuts
4
V2.00 - Installation Instructions, Specifications and Project Plans are effective 12/6/2016 . This information is updated periodically
and should not be relied upon after 2 years from 12/6/2016 . Please visit OZCOBP.com to get current information.
step 1
securing
fastener (not
included)
step 2
securing
Cap
finger tight
1" Hex Cap Nut Installation
Installation Instructions, Cap Nuts
5
Cap (finger tight)
4.5mm
Allen
Wrench
Tool Required
Recommneded Fastener:
#8x1"
(phillips head shown)
V2.00 - Installation Instructions, Specifications and Project Plans are effective 12/6/2016 . This information is updated periodically
and should not be relied upon after 2 years from 12/6/2016 . Please visit OZCOBP.com to get current information.
Tool required
3/8" Driver (not
included)
Recommneded Fastener:
OWT Timber Screws
step 2
securing
Cap
finger tight
Dome Cap Nut Installation
Installation Instructions, Cap Nuts
6
step 1
securing
fastener (not
included)
V2.00 - Installation Instructions, Specifications and Project Plans are effective 12/6/2016 . This information is updated periodically
and should not be relied upon after 2 years from 12/6/2016 . Please visit OZCOBP.com to get current information.
Hex Cap Nut (both sizes)
Apply lubricant, then remove
with driver/allen wrench
Disassembly Method...if difficult
Installation Instructions, Cap Nuts
7
Dome Cap Nut
Lightly tap with
RUBBER mallet,
then remove with
fingers
-
1
-
2
-
3
-
4
-
5
-
6
-
7
OWT Ornamental Wood Ties 16621 Installation guide
- Type
- Installation guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
OWT Ornamental Wood Ties 56655 Installation guide
-
OZCO 56650 Operating instructions
-
OZCO 56608 Specification
-
-
-
OWT Ornamental Wood Ties 51771 Installation guide
-
-
Unbranded 56644 Installation guide
-
OZCO 56605 Dimensions Guide
-
Other documents
-
OZCO 16622 Hammered Dome Cap Nut Operating instructions
-
OZCO 16649 3/4″ x 4″-6″ OWT Timber Bolt Operating instructions
-
Oz-Post 50890 Installation guide
-
-
-
-
-
-
-
