CB2 Kickstand Assembly Instructions Manual

Brand: CB2

Model: Kickstand

Type: Assembly Instructions Manual

Made in Taiwan - r05 Page 1 of 7

kickstand BOOKSHELF

hardware

components

tools required

Thank you for purchasing the Kickstand Bookshelf.

This page

lists all the contents included in the box.

Please take the time

to identify the hardware as well as

the individual components

to this product. As you

unpack and prepare for assembly, place the contents on

a carpeted or padded area to protect them from

damage.

Note: 2 people are required to safely assemble this product. (We recommend the use of hand tools instead of power tools)

Missing hardware?

Please call 800.606.6387 for replacements.

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

allen wrench (included)

phillips head screwdriver

2 - large

bolts

2 - pads

6 - large

screws

4 - small

screws

6 - plastic

anchors

6 - medium

screws

12 - wood

dowels

2 - small

cams

4 - large

cams

6 - cam

screws

40 - small

bolts

2 - frames

(1 left, 1 right)

10 - shelf supports

(5 left, 5 right)

4 - shelves 2 - side panels

(1 left, 1 right)

1 - top panel 1 - back panel

2 - drawer sides

(1 left, 1 right)

1 - drawer back 1 - drawer bottom

1 - bottom panel

1 - drawer front

kickstand BOOKSHELF

Made in Taiwan - r05 Page 2 of 7

1Attach 5 left shelf supports to left side frame with 2 small bolts per support as shown. Secure, but

do not over tighten with an allen wrench.

Attach 5 right shelf supports to right side frame with 2 small bolts per support as shown.

NOTE: Do not over tighten the bolts

right side frame

right shelf

support

left side frame

left shelf

support

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

small

bolt

small

bolt

kickstand BOOKSHELF

Made in Taiwan - r05 Page 3 of 7

Insert 4 cam screws into top panel as shown.

Secure, but do not over tighten, with a phillips

head screwdriver.

Insert 2 large cams and 2 wood dowels into

right and left side panels as shown. Make sure

arrows on each cam point towards nearest edge

with holes.

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

NOTE: Make sure arrows

on each cam point towards

nearest edge with holes

NOTE: Do not over tighten the cam screws

left and right side

panels

top panel

5 6

Fit dowel of left and right side panels into top

panel. Using a screwdriver, turn each cam

clockwise until it securely engages each cam

screw.

A. Insert back panel into grooves of assembly.

B. Attach bottom panel to assembly with 4

large screws, using a screwdriver.

bottom panel

back panel

left side panel

right side panel

top panel

NOTE: Make sure grooves

of side panels and top panel

are assembled on the same

side

kickstand BOOKSHELF

Made in Taiwan - r05 Page 4 of 7

A. With assistance of another adult, position case assembly into corresponding shelf supports and attach

bottom panel to shelf supports with 4 small bolts. Do not fully tighten the bolts.

B. Secure back panel to each frame with 1 large bolts.

A. Position 4 shelves onto corresponding shelf supports.

Secure each shelf with 4 small bolts as shown. At this

point, fully tighten all bolts with an allen wrench.

B. Adhere 2 pads to bottom of frame assembly as shown.

small

bolt

small

bolt

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

shelf

case assembly

NOTE: Make sure labeled

arrows are pointing towards

front and facing the bottom

during assembly

shelf

large

bolt

kickstand BOOKSHELF

Made in Taiwan - r05 Page 5 of 7

10 11

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

NOTE: Do not over tighten the screws

A. Insert 1 small cam into left and right drawer sides as

shown. Make sure arrows on each cam point towards the

nearest edge with holes.

B. Insert 4 wood dowels into drawer back as shown.

C. Fit dowels of drawer back into left and right

drawer sides as shown. Attach each side with

2 large screws. Secure, but do not over

tighten, with a phillips head screwdriver.

Insert drawer bottom into grooves of assembly

as shown.

Insert 2 cam screws and 4 wood dowels into

drawer front as shown, using a screwdriver.

drawer back

left drawer

side

right drawer

side

kickstand BOOKSHELF

Made in Taiwan - r05 Page 6 of 7

Fit dowels of drawer front into drawer sides as

shown. Using a screwdriver, turn each cam

clockwise until it securely engages each cam

screw.

B. Drill a hole in the wall stud. If the wall stud is not

available, drill a hole in the wall that is slightly smaller in

diameter than the anchor. Gently tap the plastic anchor

until the flange of the anchor is flush with the wall.

With the assistance of another adult, carefully

position frame assembly upright and determine

the final location of unit.

A B

A. Locate bracket tabs on left and side frames.

Mark each position on the wall. With the

assistance of another adult, set assembly aside.

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

WALL

WALL WALL

kickstand BOOKSHELF

Made in Taiwan - r05 Page 7 of 7

cleaning & care

Clean surfaces with a dry or damp soft cloth. Do not use

abrasive cleaners. Do not use furniture wax or polish as

the unit is finished with a protective clear lacquer.

Place the unit so the tabs of frame assembly are

aligned with the plastic anchors. Insert 1 medium

screw through each tab and plastic anchor with a

screwdriver.

Extend drawer glides from case assembly as

shown. Align holes on underside of drawer

assembly with holes in the drawers glides. Using

a screwdriver, secure glides to drawer with 4

small screws.

Assembly is now complete.

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

DETAIL VIEW

FROM BELOW

medium

screw

drawer

assembly

CB2 Kickstand Assembly Instructions Manual

CB2 Kickstand Assembly Instructions Manual

CB2 Kickstand Assembly Instructions Manual

Related papers

Other documents