SEI HZ104800TX Assembly Instruction Manual

Page | 1

HZ104800TX

Wine/ Bar Cabinet

Assembly Instruction

For assistance with assembly, contact:

Southern Enterprises Inc.

Customer Service 1-800-633-5096

[email protected]

www.seidal.com

PO# 13412

Page | 2

HZ104800TX

Wine/ Bar Cabinet

Parts List

Please review all parts and hardware before disposing of any packaging.

Call Customer Service if missing hardware. Do not return to store/retailer.

Using a screw that is too long will cause damage. Before beginning assembly,

separate each type of screw. Carefully study the screw diagrams below.

You may receive extra hardware with your unit.

A 1pc

Left Top Panel

B 1pc

Right Top Panel

C 1pc

Support Bar

D 1pc

Door Panel

E 1pc

Back Panel

F 1pc

Back Panel

G 1pc

Bottom Shelf

H 4pcs

Leg

I 1pc

Left Side Panel

J 1pc

Right Side Panel

K 1pc

Left Front Panel

L 1pc

Right Front Panel

M 1pc

Left Back Panel

N 1pc

Right Back Panel

O 2pcs

Upper Side Shelf

P 4pcs

Lower Side Shelf

Q 1pc

Drawer Front Panel

R 1pc

Drawer Back Panel

S 1pc

Left Side Panel

T 1pc

Right Side Panel

U 1pc

Drawer Bottom

V 1pc

Drawer Support

W 2pcs

Horizontal Panel

X 5pcs

Vertical Panel

Y 1pc

Shelf

Z 4pcs

File Rod

Care and Cleaning Instructions:

Before using, wipe with a clean, dry cloth.

Periodically apply furniture wax to renew the finish.

Avoid rubbing or scratching the surface with rough or

abrasive objects.

For replacement parts or questions, please call

Customer Service at 1-800-633-5096.

Assembly Tool Required

Phillips and Flat Head Screwdriver

Page | 3

HZ104800TX

Wine/ Bar Cabinet

Parts List

Please review all parts and hardware before disposing of any packaging.

Call Customer Service if missing hardware. Do not return to store/retailer.

Using a screw that is too long will cause damage. Before beginning assembly,

separate each type of screw. Carefully study the screw diagrams below.

You may receive extra hardware with your unit.

1 26pcs

Wood Dowel

( Ø5/16 X 1”)

2 28pcs

Cam Bolt (1-7/16”)

3 28pcs

Cam Lock

4 12pcs

Bolt (Ø1/4 X

2-3/8”)

5 16pcs

Spring Washer

6 16pcs

Flat Washer

7 8pcs

Barrel Nut

8 4pcs

Bolt (Ø1/4 X

1-3/16

”)

9 8pcs

Screw (1-3/16”)

10 2pcs

Bolt (Ø1/4 X7/8”)

11 2pcs

Knob

12 12pcs

Screw (5/8”)

13

DOOR HINGE (2pcs)

SCREW (1/2”) (12pcs)

14 2pcs

Magnet

15 1pc

Door Hinge (Left)

16 1pc

Door Hinge (Right)

17 1pc

Allen Key

18 1pc

Plastic Anchor

19 1pc

Screw (1-3/16”)

20 1pc

Screw (5/8”)

21 1pc

Anti-Tip Strap

22 2pcs

Flat Washer

Care and Cleaning Instructions:

Before using, wipe with a clean, dry cloth.

Periodically apply furniture wax to renew the finish.

Avoid rubbing or scratching the surface with rough or

abrasive objects.

For replacement parts or questions, please call

Customer Service at 1-800-633-5096.

Assembly Tool Required

Phillips and Flat Head Screwdriver

Page | 4

HZ104800TX

Wine/ Bar Cabinet

Assembly Instructions

Step 1:

Insert Wood Dowels (1) and

screw Cam Bolts (2) into Left

Back Panel (M) and Right

Back Panel (N).

Attach Upper Side Shelves

(O) and Lower Side Shelves

(P) with Back Panels (M) & (N)

using Cam Locks (3).

Turn Cam Locks clock-wise to

secure panels (P) & (O).

Step 2:

Screw Cam Bolts (2) to Left &

Right Side Panels (I) & (J).

Attach assembled panels from

Step 1 to Left Side Panel (I)

and Right Side Panel (J) by

inserting attached Cam Bolts

into corresponding holes.

Secure with Cam Locks (3)

and turn clock-wise with a

Phillips screwdriver.

Note: Back Panel (M)

corresponds to Left Side

Panel (I) and Back Panel (N)

corresponds to Right Side

Panel (J).

M

P

3 2

1

P

O

P

O

N

I

M

3

2

J

N

3

2

Page | 5

Step 3:

Insert File Rods (Z) into

corresponding holes.

Attach Left Front Panel (K)

and Right Front Panel (L)

using Wood Dowels (1), Cam

Bolts (2) and Cam Locks (3).

Note: Make sure to attach

the File Rods (Z) onto both

units.

Step 4:

Attach Door Hinges (13) to

Shelf (Y) using supplied

Screws for hinges.

Attach Shelf (Y) to Door Panel

(D) as shown.

K

I

J

L

2

1

3

Z

Page | 6

Step 5:

Attach assembled unit from

Step 3 that has Right Side

Panel (I) to assembled unit

from Step 4 using Wood

Dowels (1), Barrel Nuts (7),

Spring Washers (5), Flat

Washers (6) and Bolts (4).

Tighten with Allen Wrench

(17).

Note: Make sure threaded

holes in Barrel Nuts are facing

adjacent holes where Bolts will

come through to meet.

Also note placement of

grooves and make sure to

match as shown.

Step 6:

Attach Magnets (14) to Left

Side Panel (I) and Right Side

Panel (J) using Screws (12).

Y

7

1

654

17

I

14

12

J

Page | 7

Step 7:

Attach Support Bar (C) using

Wood Dowel (1), Cam Bolt (2)

and Cam Lock (3).

Slide Back Panel (E) into

grooves of Support Bar (C)

and Shelf (Y).

Step 8:

Attach Right Side Panel (J) to

Shelf (Y) and Support Bar (C)

using Wood Dowels (1), Cam

Bolts (2), Cam Locks (3),

Barrel Nuts (7), Spring

Washers (5), Flat Washers (6)

and Bolts (4).

Tighten Bolts with Allen

Wrench.

3

12

E

I

C

Y

J

7

17

4

5

6

1

3

2

1

Page | 8

Step 9:

Attach Bottom Shelf (G) using

Spring Washers (5), Flat

Washers (6), Barrel Nuts (7)

and Bolts (4).

Tighten Bolts with Allen

Wrench.

Step 10:

Attach Legs (H) using Spring

Washers (5), Flat Washers (6)

and Bolts (4).

H

17

4

5

6

G

F

4

5

6

7

1

Page | 9

Step 11:

Attach Door Hinges (16) using

Screws (12).

Attach Knob (11) using Bolt

(10).

Step 12:

Insert Wood Dowels (1) into

corresponding holes.

Place Left Top Panel (A) and

Right Top Panel (B) on to top

as shown.

Secure using Spring Washers

(5), Flat Washers (6) and Bolts

(8).

Tighten with Allen Wrench.

A

B

1

6

5

8

D

12

16

10

11

Page | 10

Step 13:

Assemble Left Side Panel (S)

and Right Side Panel (T) with

Drawer Front Panel (Q) using

Screws (9).

Tighten screws with Phillips

screwdriver.

Step 14:

Slide Drawer Bottom (U).

Attach Drawer Support (V)

with Drawer Front Panel (Q)

and Drawer Back Panel (R)

using Cam Bolt (2) and Cam

Lock (3).

Step 15:

Secure Drawer Side Panels

with Drawer Back Panel (R)

using Screws (9).

Q

T

S

9

U V

2

3

R

Page | 11

Step 16:

Insert assembled drawer

into its corresponding

place and assure it glides

smoothly.

Attach Knob (11) using Bolt

(10).

Insert Horizontal Panel (W)

into Vertical Panel (X) as

shown. Once assembled,

insert bottle holder assembly

into bottom space of cabinet.

Step 17:

Fix Wine/ Bar cabinet to wall

using Screws (19), (20), Flat

Washer (22), Plastic Anchor

(18) and Anti-Tip Strap (21).

X W

10

11

The wall

22

20

19

21

18

Page | 12

Please immediately examine this product carefully. Any request for missing parts or damage replacement must be received within 90 days of your receipt

of the product. Replacement, if available, will be honored within this time frame. Parts will not be available for items arriving fully assembled. We do not

recommend modifying product(s) and we are not responsible for any damages due to product modification(s). If damages or missing parts are not

reported within 90 days of your receipt, we are under no obligation to provide parts or replacement merchandise.

For product issues, please contact Southern Enterprises at 800-633-5096 (toll-free) / 972-869-0111 (Dallas) Mon-Fri 9am – 4pm CST, or email us at

[email protected]m. Please ask for customer service representative for issues involving damages or replacement parts. Please ask for technical

assistance representative for any issues with product and assembly/construction.

Please contact the retailer that you purchased from for returns.

Customer Information

Name

Address

City/State/Zip Code

Phone Numbers

Please indicate where you purchased this item: Store/Website/Catalog

Please indicate color/size/style number:

Style No Parts Letter Parts Description Quantity Needed

Customer Service 1-800-633-5096

[email protected]om

Southern Enterprises, Inc.

600 Freeport Parkway, Suite 200

Coppell, Texas 75019

Parts Replacement Form

SEI HZ104800TX Assembly Instruction Manual

SEI HZ104800TX Assembly Instruction Manual

Related papers

Other documents