CB2 Trine Queen or King Bed Assebly Instructions

Brand: CB2

Model: Trine Queen or King Bed

Type: Assebly Instructions

(We recommend the use of hand tools instead of power tools)

hex wrench (included)

flat head screwdriver

phillips head screwdriver

trine QUEEN OR KING BED

Made in Vietnam - r07 Page 1 of 4

hardware

components

tools required

Missing hardware?

Please call 800.606.6387 for replacements.

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

8 - threaded

bolts

Thank you for purchasing the Trine Queen or King Bed.

This page

lists all the contents included in the box. Please

take the time

to identify the hardware as well as the

individual components

to this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

14 - large

screws

32 - small

screws

4 - corner

brackets

8 - half-moon

brackets

8 - hex

nuts

1- headboard 1 - footboard

3 - support

legs

1 - center rail

2 - side rails

(1 left, 1 right)

2 - slat

assemblies

8- spring

washers

8 - flat

washers

trine QUEEN OR KING BED

MadeinVietnam -r07 Page2of4

CustomerService800.606.6252|Latestinstructionsavailableatwww.cb2.com

A. Attach 4 threaded bolts to headboard as shown. Secure, but do not over tighten,

bolts with a flat head screwdriver.

B. Attach 4 theaded bolts to footboard as shown.

A. With the assistance of another adult,

position headboard upright. Fit pre-assembled

dowels of left and right side rails into headboard

as shown. Make sure each threaded bolt of headboard

fits securely into corresponding holes of each side rail.

B. Insert 2 half-moon brackets into each left and right side

rails as shown. Loosely secure each side rail with 2 flat

washers, 2 spring washers and 2 hex nuts, using a hex wrench.

Do not fully tighten. Repeat step 2A-B for footboard.

footboard

headboard

footboard

headboard

right

side rail

left

side rail

threaded

bolt

trine QUEEN OR KING BED

MadeinVietnam -r07

Page 3of4

CustomerService800.606.6252|Latestinstructionsavailableatwww.cb2.com

A. Attach 3 support legs to center rail.

Turn each leg clockwise to secure.

B. Fit center rail to corresponding notch

on headboard and footboard. Secure

center rail with 2 large screws, using a

screwdriver.

support

leg

center

rail

NOTE: Do not

over tighten the

screws

Attach 4 corner brackets to bed assembly with 8

small screws per bracket as shown with a phillips

head screwdriver. Do not over tighten the screws.

Make sure the long end of the corner bracket is

attached to the headboard and footboard as

shown. After all brackets are attached, go back

and FULLY TIGHTEN all screws on brackets, bolts

and hex nuts.

NOTE: Make sure the long end

of the corner bracket is attached

to the headboard and footboard

as shown

NOTE: Do not

over tighten the

bolts

trine QUEEN OR KING BED

MadeinVietnam -r07

Page 4of4

CustomerService800.606.6252|Latestinstructionsavailableatwww.cb2.com

With assistance of another adult, place 2 slat assem-

blies onto side and center rails. Attach each slat

assembly with 6 large screws as shown.

Assembly is now complete.

cleaning & care

Clean surfaces with a dry soft cloth. Do not use abrasive cleaners.

CB2 Trine Queen or King Bed Assebly Instructions

CB2 Trine Queen or King Bed Assebly Instructions

CB2 Trine Queen or King Bed Assebly Instructions

Related papers

Other documents