Specications
Safety and Notes
Model MRKDHx-xKxW-xS
Dimming 0–10 V
• Ensure xture input voltage is compatible with LED retrot kit before installation.
• This product should be installed by a certied electrician in accordance
with applicable national, state, and local building and electrical codes.
• To reduce the risk of electric shock, ensure that the main power source and circuit
breakers are switched o before performing any installation or wiring procedures.
Inspect wiring and components for damage before restoring power to the xture.
• Avoid looking directly into the lamps when illuminated.
• Not intended for use with emergency lighting.
• For ballast bypass only.
Note: Number and length of tubes will vary by kit
MRKD2-X1-40K25W-2S
User Manual
MRKDx-X1 Series
Magnetic Mount LED Tube Light Retrot Kit
Important: Read all instructions prior to installation.
CERTIFICATE OF COMPLIANCE
This authorizes the application of the Certification Mark(s) shown below to the models described in the Product(s)
Covered section when made in accordance with the conditions set forth in the Certification Agreement and Listing
Report.
Certificate for Report 16052426HKG-001
Page1of2
Certificate Issued: May 8, 2018
ED 16.3.15 (20-Apr-17) Mandatory
Basic Listee:
Address:
Country:
TorshareLtd.
Multiple Listee:
Address:
Country:
SuperBrightLEDs,Inc.
Party Authorized To Apply Label: Torshare Ltd.
Report Issuing Office: Intertek Testing Service Shanghai
Control Number:
5000444
Authorized by:
_______________________________________________
for Dean Davidson, Certification Manager
This Certificate of Compliance is for the exclusive use of Intertek's Client and is provided pursuant to the Certification Agreement between Intertek and its Client. Intertek's responsibility and liability are
limited to the terms and conditions of the Agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the Agreement, for any loss, expense or damage
occasioned
by
the use of this Certificate. Only the Client is authorized to permit copying or distribution of this Certificate and then only in its entirety. Use of Intertek’s Certification mark is restricted to the conditions
laid out in the Agreement and in this Certificate. Any further use of the Intertek name for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek.
Initial Factory Assessments and Follow up Services are for the purpose of assuring appropriate usage of the Certification mark in accordance with the Agreement, they are not for the purposes of
production quality control and do not relieve the Client of their obligations in this respect.
Intertek Testing Services NA
Inc.
545 East Algonquin Road, Arlington Heights, IL
60005
Telephone 800-345-3851 or 847-439-5667 Fax
312-283-1672
Standard(s):
StandardForLight‐EmittingDiode(Led)RetrofitLuminaireConversionKits[UL1598C:2014
Ed.1+R:17Nov2016]
CSAT.I.L.B‐79AIssued:2015/01/15InterimCertificationRequirementsforLEDRetrofitKitsand
FieldRetrofittedLuminaires
Product:
LED Retrofit Unit
5thMinyingRoadNo.3IndustrialAreaShuitian
ShiyanTownBao'anDistrict,Shenzhen,
Guangdong,518108
China
4400EarthCityExpy,EarthCity,MO
63045
USA
4400 Earth City Expy, St. Louis, MO 63045 866-590-3533 superbrightleds.com
Rev Date: V1 12/14/2021
Check product label for specific electrical
specifications related to installation.
Improper installation will void warranty.
Wiring Diagram
line
(black)
neutral
(white)
- (white) + (red)
dim (+)
(purple)
dim (-)
(gray/pink)
