Super Bright LEDS LSFD-SW3C40W-H User manual

Super Bright LEDS
Brand
Super Bright LEDS
Model
LSFD-SW3C40W-H
Type
User manual

Super Bright LEDS LSFD-SW3C40W-H is a versatile and customizable linear LED strip light that offers a wide range of features for both indoor and outdoor lighting applications. With its dimmable and CCT-selectable design, this fixture provides precise control over the ambiance and brightness of your space. The LSFD-SW3C40W-H is designed for surface mounting or optional hanging, making it suitable for a variety of installation scenarios. Its durable construction and high-quality components ensure long-lasting performance and reliability.

Super Bright LEDS LSFD-SW3C40W-H is a versatile and customizable linear LED strip light that offers a wide range of features for both indoor and outdoor lighting applications. With its dimmable and CCT-selectable design, this fixture provides precise control over the ambiance and brightness of your space. The LSFD-SW3C40W-H is designed for surface mounting or optional hanging, making it suitable for a variety of installation scenarios. Its durable construction and high-quality components ensure long-lasting performance and reliability.

36.2 in
(920 mm)
36.2 in
(920 mm)
Diffuser Lens Release (2 on each side)
36.2 in
(920 mm)
36.2 in
(920 mm)
Diffuser Lens Release (2 on each side)
Selectable CCT Linear LED Strip Light
User Manual
Important: Read all instructions prior to installation. LSFD-SW3C40W-H
4400 Earth City Expy, St. Louis, MO 63045 866-590-3533 superbrightleds.com
Rev Date: V0.1 11/05/2020
Safety and Notes
CCT Selection
Installation Instructions (surface mount)
LSFD-SW3C40W-H
• Product should be installed in accordance with applicable national, state, and local
building and electrical codes.
• To reduce the risk of electric shock, ensure that the main power source and circuit
breakers are switched o before performing any installation or wiring procedures.
• Avoid looking directly into the lamp when illuminated.
• Ensure all mounts are securely attached and will support the weight of the xture.
• Failure to properly support the xture may result in damage or injury, for which the
manufacturer does not assume responsibility.
Check product label for specific electrical
specifications related to installation.
Improper installation will void warranty.
1. Measure and drill holes in mounting
surface.
2. Remove diuser lens using the
releases pictured to the right.
3. Attach mounting plate. With supply
power o, connect wiring.
Note: Conduit can be directly attached
to mounting plate.
4. Securely mount xture.
5. Reinstall diuser lens.
6. Select desired CCT value using switch.
Wiring Diagram
120–277 VAC Input
0–10 V Dimming
Line
Neutral
Ground
Black
L L
N N
GND GND
White
Dim (+)
Dim (-)
Purple
+ +
- -
Gray
Green
Line
Neutral
Ground
Black
L L
N N
GND GND
White
Dim (+)
Dim (-)
Purple
+ +
- -
Gray
Green
Use CCT selection switch to adjust CCT setting.
36.2 in
(920 mm)
36.2 in
(920 mm)
Diffuser Lens Release (2 on each side)
5yr
Selectable CCT Linear LED Strip Light
User Manual
Important: Read all instructions prior to installation. LSFD-SW3C40W-H
4400 Earth City Expy, St. Louis, MO 63045 866-590-3533 superbrightleds.com
Rev Date: V0.1 11/05/2020
Installation Instructions (optional hanging kit LSFD-HK)
1. Measure and drill appropriate holes in ceiling and install hooks (not included) if needed.
2. Attach cables to ceiling hooks or wrap around suitable pipe or beam.
3. Attach triangular hangers to cables, then hang light on them.
4. With supply power o, connect wiring.
5. Adjust CCT using switch on the side of xture.
36.2 in
(920 mm)
36.2 in
(920 mm)
Diffuser Lens Release (2 on each side)
5yr
  • Page 1 1
  • Page 2 2

Super Bright LEDS LSFD-SW3C40W-H User manual

Super Bright LEDS
Brand
Super Bright LEDS
Model
LSFD-SW3C40W-H
Type
User manual

Super Bright LEDS LSFD-SW3C40W-H is a versatile and customizable linear LED strip light that offers a wide range of features for both indoor and outdoor lighting applications. With its dimmable and CCT-selectable design, this fixture provides precise control over the ambiance and brightness of your space. The LSFD-SW3C40W-H is designed for surface mounting or optional hanging, making it suitable for a variety of installation scenarios. Its durable construction and high-quality components ensure long-lasting performance and reliability.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents