2. Computers & electronics
  3. Data input devices
  4. Keyboards
  5. Workrite Ergonomics
  6. Keyboard Trays

Workrite Ergonomics Keyboard Trays Assembly Instructions

  • Hello! I've reviewed the Disassembly Instructions for the Adjustable Keyboard Platform. This document provides detailed steps on how to disassemble the keyboard platform, including removing components like the wrist rest, mouse pad, and keyboard track. I'm ready to answer your questions based on this document.
  • How to remove the Wrist Rest?
    How to remove the Mouse Pad?
    How to remove the Keyboard Platform?
    How to dispose of Mouse Pad?
    How to dispose of Hardware?
Workrite Ergonomics | 800.959.9675 www.workriteergo.com 1 of 2
1
a
b
c
2
a
b
c
1a
2a
2a
1b
Disassembly Instructions:
Adjustable Keyboard Platform
Steps to remove the Wrist Rest and Wrist
Mouse Pad.
Unscrew the two Phillips Head Wood Screws
and Washers, then remove the Wrist Rest.
Remove the Mouse Pad.
Dispose of Mouse Pad through local WTE
(Waste to Energy) Program and recycle Wrist
Rest or WTE program.
Steps to remove Keyboard Platform.
Unscrew Flat Head Screws and then remove
Keyboard Platform from Arm.
Dispose of Platform through WTE program.
Dispose of Hardware through Metal Recycling.
2 of 2 Workrite Ergonomics | 800.959.9675 www.workriteergo.com
1500477 Rev A
⅛" gap
Pilot Holes
3
a
b
3a
3a
Steps to remove Keyboard Track from Worksurface.
Unscrew Wood Screws from the Pilot Holes and remove Keyboard Track from worksurface.
Dispose Wood Screws and Keyboard Track Assembly in Metal Recycling.
/