DV8 OFFROAD INFEND-03RR Installation guide

Brand
DV8 OFFROAD
Model
INFEND-03RR
Type
Installation guide

This manual is also suitable for

……………………………………………………………………………………………………………………………………………………………………………
1. Remove your stock factory JL inner fenders and fenders flare from the
Jeep.
2. Remove your new DV8 rear inner fenders from their packaging.
3. Locate and separate the driver and passenger side pieces.
4. Install the top section of each piece using the provided hardware.
5.
6. With the provided rivnuts, install them into the holes on the front fenders
DV8 OFFROAD INFEND-03RB(RR)
JL REAR INNER FENDERS
In
…..0……………………………………000000000000000000000000000000000000000000000000000000000000000000
5. Place inner fender into wheel well. Make sure the vent is facing forward.
6. Hold up the front bolt hole against the vehicle and install provided nuts
and bolts. Continue to work your way to the center bolt and then the back
hole last.
7. Tighten bolts to ensure they are secure.
8. Reinstall fender flare.
If you have any questions or concerns, please feel free to call us at 951-680-
9595 or email info@dv8offroad.com
  • Page 1 1
  • Page 2 2

DV8 OFFROAD INFEND-03RR Installation guide

Brand
DV8 OFFROAD
Model
INFEND-03RR
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents