2. Kamstrup
  3. Suspension

Kamstrup Suspension Installation guide

  • I have carefully reviewed the provided Installation Guide for the MULTICAL calculator. The document provides instructions for installing the calculator, with special attention to mounting and cable management. I'm ready to answer your questions about the installation process.
  • What should be observed when installing the calculator in humid environments?
    Can the suspension be used on condensing pipes?
    How should temperature sensors be mounted?
INSTALLATION
Suspension for calculator
English
Kamstrup A/S
Industrivej 28, Stilling, 8660 Skanderborg
TEL: 89 93 10 00 · FAX: 89 93 10 01
info@kamstrup.dk · www.kamstrup.dk
2
Appendix to MULTICAL® Installation Guide
If the installation is performed in humid environments, or if condensation might occur,
the following must be observed:
1. Installation of calculator
Front, vertical Front, at an angle
between horizontal
and vertical
Front, horizontal
3
Note! Cables must be installed from below.
Installation example with suspension.
Note: The suspension must not be used on condensing pipes.
Suspension kit item no. 5915-114.
3. Installation of temperature sensors
Temperature sensors must be mounted from below.
5512-357 GB/10.2007/Rev. A2
/