2. Kamstrup
  3. MULTICAL® 66-CDE

Kamstrup MULTICAL® 66-CDE User guide

  • Hello! I have analyzed the Operators' Guidelines for MULTICAL heat meter. This document explains how the device measures district heating energy using water flow and temperature sensors. It also describes how to use the display to view different readings. I'm ready to answer your questions about the MULTICAL heat meter.
  • How does the MULTICAL heat meter calculate energy consumption?
    How can I see a new reading on the MULTICAL display?
    What will be displayed as default reading?
MULTICAL heat meter functions in
the following manner:
registers the
quantity [m ] of district heating
water that circulates in the heating
installation.
placed in
the flow and return pipes register
the degree of cooling in the heating
installation, i.e. the difference
between the inlet temperature and
the outlet temperature.
Using this information is
able to calculate the amount of
energy consumed.
The water meter
The temperature sensors
MULTICAL
3
NB: tThe arrow indicates the type
of measurement displayed. The
unit can be seen to the right in the
display.
Kamstrup A/S
Industrivej 28, Stilling
DK-8660 Skanderborg
TEL:+4589931000
FAX:+4589931001
WEB: www.kamstrup.com
Measuring energy
Operators' Guidelines ®
for MULTICAL
When you press the front key
and hold it down for one second,
a new reading will be displayed.
Consumed energy is the default
reading, which will be displayed
again 220 seconds after the key
has been activated.
MULTICAL display
®
5511-543 GB / 00-02 / REV.A1
Number of hours MULTICAL
has been in operation.
Consumed district heating
water.
Current flow temperature. Current return tempera-
ture.
Current cooling.
Current heat power. Peak power. Current water velocity.
Information code. If this
number is larger than
"000", please contact
your heat supplier.
Number of hours with
information code >000.
Consumed energy in kWh,
MWhorGJ.
/