Kamstrup ZigBee® module Installation and User Guide

Brand
Kamstrup
Model
ZigBee® module
Type
Installation and User Guide
ZigBee module
Instlltion guide
Kamstrup A/S · Industrivej 28, Stilling
DK-8660 Skanderborg · T: +45 89 93 10 00
F: +45 89 93 10 01 · inf[email protected]
55121114_B1_GB_03.2017
Commissioning
z
The module is strted for the
first time
Light emitting diode (LED) 1 flshes t
intervls of 1 second s the module
scns for  network.
LEDs 2 nd 3 re turned off.
z
The module hs found 
coordintor nd is connected
to this
LED 1 flshes every third second
indicting tht the module is in
”identify mode”. In this mode, the
module communictes ctively with
the network.
z
15 minutes fter connecting the
module to the coordintor
LEDs are turned off.
Pulse inputs
The module hs two pulse inputs which
cn be used for totliztion of pulses
from wter nd gs meters. Pulse
resolutions nd units re utomticlly
configured on the bsis of MULTICAL®.
Terminl 65 Pulse input A/In-A (+)
Terminl 66 Pulse input A/In-A (-)
Terminl 67 Pulse input B/In-B (+)
Terminl 68 Pulse input B/In-B (-)
Ordering
The module cn be mounted in the
following meters:
MULTICAL® 66
MULTICAL® 61
MULTICAL® 601
MULTICAL® 602
Single module:
670060000000.E
Module in MULTICAL® 61/601/602:
670060000000.0
Light
emitting
diodes
1-3
Pulse
inputs
The
module’s
MAC
ddress
Push
button
Light
emitting
diode 3
Light
emitting
diode 2
Link
sttus
Optiml
> Norml
Norml
< Norml
  • Page 1 1
  • Page 2 2

Kamstrup ZigBee® module Installation and User Guide

Brand
Kamstrup
Model
ZigBee® module
Type
Installation and User Guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents