Page is loading ...
11
STAGE PAGE
41 Central forward chassis frame 162
42 Forward chassis frame 165
43 Radiator pipes 168
44 The front subframe 172
45 Right front suspension arm 175
Published in the UK by De Agostini UK Ltd, Royds Withy King, 65 Carter Lane, London EC4V 5EQ.
Published in the USA by De Agostini Publishing USA, Inc., 299 Park Avenue • New York, New York 10171.
All rights reserved © 2019
Warning: Not suitable for children under the age of 14.
is product is not a toy and is not designed or intended for use in play.
Items may vary from those shown.
162
FORD GT
41-A Central forward
chassis frame
41-B Screws FD01 2.3 x 4mm
YOUR PARTS
41-A
FD01
Stage 41: Central forward
chassis frame
STEP BY STEP
163
STEP 41-1
Prepare the chassis
assembly from the
previous stage.
STEP 41-3
Make sure that the frame
is ush with the central
rear frame and the panel
.
STEP 41-2
Place the central forward
chassis frame (41A) into
position on the main
chassis panel. The tabs
should t over the posts
on the panel.
38-A
38-A
41-A
41-A
164
FORD GT
STEP 41-4
Secure the frame to
the panel with four
FD01 screws in the
order shown.
STAGE COMPLETE
38-A
41-A
FD01
12
34
STEP BY STEP
165
42-A Forward chassis
frame
42-B Screws FD01 2.3 x
4mm
YOUR PARTS
42-A
FD01
Stage 42:
Forward chassis frame
166
FORD GT
STEP 42-1
Prepare the chassis
assembly from the
previous stage.
STEP 42-3
Mount the forward
chassis frame (42A)
onto the panel,
engaging the holes
and posts, as shown.
STEP 42-2
Align the two holes at
the front of the forward
chassis frame (42A) with
the corresponding posts
on the chassis panel.
38-A
38-A
42-A
42-A
STEP BY STEP
167
STEP 42-4
Secure the chassis frame
with ve FD01 screws in the
order shown.
STAGE COMPLETE
FD01
12
5
34
42-A 38-A
168
FORD GT
43-A Radiator pipes
43-B Right brake fluid bracket
and pipe
43-C Left brake fluid bracket
and pipe
43-D Radiator lines
43-E FD04 screws 1.8 x 3.5mm
Stage 43:
Radiator pipes
YOUR PARTS 43
FD04
43-A
43-C
43-D
43-B
STEP BY STEP
169
STEP 43-1
Prepare the chassis
assembly from the
previous stage.
STEP 43-3
Secure the radiator pipes
(43A) to the chassis (38A)
with an FD04 screw.
STEP 43-2
Place the radiator pipes (43A) onto the three posts in
the recessed area in the chassis panel, as shown.
STEP 43-4
Press the right brake uid bracket and pipe
(43B) onto the indicated posts on the chassis.
FD04
43-A
43-A
38-A
38-A
Posts
Recess
43-B
43-B
38-A
38-A
43-A
170
FORD GT
STEP 43-5
Secure the right
bracket to the chassis
with an FD04 screw.
STEP 43-7
Secure the left bracket
with an FD04 screw.
STEP 43-6
Fit the left brake uid
bracket and pipe (43C)
to the other side of the
chassis, as shown.
FD04
43-C
43-C
43-C
FD04
43-B
38-A
38-A
38-A
38-A
43-A
FD04
FD04
43-B
43-C
43-C
43-C
38-A
38-A
38-A
38-A
43-A
STEP BY STEP
171
STEP 43-8
Insert the combined end of the
radiator lines (43D) into the
radiator pipe, as shown.
STAGE
COMPLETE
43-D
43-A
43-A
43-D
172
FORD GT
Stage 44:
The front subframe
YOUR PARTS
44-A Front subframe
44-B Spare wheel mount
44-C FP01 screws 2.3 x 4mm
FP01
44-A
44-B
STEP BY STEP
173
STEP 44-1
Turn the front subframe
(44A) upside down and
insert the spare wheel
mount (44B) into the
indicated hole.
STEP 44-3
Secure the spare wheel
mount to the subframe
with an FP01 screw.
STEP 44-2
Press the spare wheel
mount onto the post next
to the hole you inserted it
into, as shown.
44-B
44-A
44-B
44-B
44-A
44-A
FP01
Post
174
FORD GT
STAGE
COMPLETE
STEP BY STEP
175
Stage 45:
Right front suspension arm
YOUR PARTS
FP06
45-A Right front suspension
arm upper wishbone
45-B Right front suspension
arm lower wishbone
45-C Right front suspension
arm bracket
45-D FP06 screw 2.3 x 5mm
45-C
45-A
45-B
176
FORD GT
STEP 45-1
Position the right
front suspension
arm lower wishbone
(45B) and the right
front suspension
arm bracket (45C)
as shown here. Both
parts are marked
with the letter R.
STEP 45-3
Take the right front
suspension arm upper
wishbone (45A) and hold
it over the bracket in
the position shown. The
wishbone is also marked
with the letter R.
STEP 45-2
Engage the wishbone (45B) with the
bracket (45C), as shown.
45-C
45-C
45-B
45-B
45-C
45-A
STEP BY STEP
177
STEP 45-4
Press the upper
wishbone into place.
STEP 45-6
Align the three holes on the
inside of bracket with the
three corresponding posts on
the side of the subframe.
STEP 45-5
Prepare the subframe
assembly from the
previous stage.
45-B
45-C
45-A
44-A
45-C
178
FORD GT
STEP 45-7
Place the bracket onto the subframe
and secure with three FP06 screws.
STAGE COMPLETE
45-C
FP06
/
