PACK 4PACK 4
STAGE PAGE
16 The port mainwheel 41
17 Port main landing gear 43
18 Starboard mainwheel hydraulics 45
19 The starboard mainwheel 47
20 Starboard main landing gear 49
Published in the UK by De Agostini UK Ltd, Royds Withy King, 65 Carter Lane, London EC4V 5EQ.
Published in the USA by De Agostini Publishing USA, Inc., 299 Park Avenue • New York, New York 10171.
All rights reserved © 2019
Warning: Not suitable for children under the age of 14.
is product is not a toy and is not designed or intended for use in play.
Items may vary from those shown.
40
Assembly
Stage 16: The port
mainwheel
1 Place the tyre (P048) into a container of hot water to soften it. Then, take it out of the water and
carefully insert the drum (D034) into it.
P048 P048
Your parts
1. P048 - Tyre
2. D034 - Drum
3. P049 - Cap
4. P050 - Disk
5. D035 - Wheel axle and
rod
6. P051 - Sleeve
IM screws 1.7 × 3 × 4 mm
(2 pieces)
P048
P049
P050
D035 P051
IM
D034
D034
41
P050 D035
2 Insert the wheel
axle and rod
(D035) into the
hole in the disc
(P050).
3 Fit the sleeve
(P051) onto
the axle
(D035) and
disk (P050).
Fix it in place
with an IM
screw.
4 Insert the sleeve at the
end of the assembly into
the drum.
5 Fit the cap
(P049) into the
drum (D034),
as shown. This
stage is now
complete.
D034
D034
P051
P050
P049
42
Stage 17: Port main
landing gear
Your parts
1. P052 - Port main
landing gear
suspension socket
2. P053 - Port main
landing gear
suspension
3. D036 - Port
main landing
gear suspension
mounting bracket
4. P054 - Port main
landing gear
suspension lower
link
5. P055 - Port main
landing gear
suspension upper
link
6. X001 - Port main
landing gear
suspension spring
DM screws 1.7x4 mm
(2 pieces)
JM screws 2.0x6 mm
(2 pieces)
DP screws 1.7x6 mm
(3 pieces)
EP screws 1.7x5 mm (3
pieces)
CM screws 1.7 x
3.5mm (2 pieces).
Assembly
1 Retrieve the assemblies from Stages 15 and 16.
Secure the lower link (P054) to the wheel axle
with a DP screw.
P052
P054 P055 X001
DM JM
DP EP CM
P053 D036
P054
D035
43
2 Fix the upper link (P055) to the lower (P054)
with an EP screw. 3 Insert the shock absorber spring (X001) into the
port main landing gear support (P053).
4 Insert the rod into the support onto the spring. 5 Secure the upper link (P055) to the support
(P053) with a DP screw.
6 Fix the mounting bracket(D036)
to the support (P053) with an
EP screw.
P055
P055
P053
P053
P053
D036
X001
D035
44
7 Place the end of the port mainwheel hydraulics
shaft into the bracket (D036) and secure it with
a JM screw.
8 Insert the end of the support into the port
landing gear wall, as shown.
9 Place the end of the support into the socket
(P052). Then secure the socket to the wall
with a DM screw.
10 Secure the port mainwheel hydraulic pivot
(D033) to the end of the wall with a CM screw.
11 This stage is now
complete. Check
that the landing
gear can move
away from and
towards the wall,
as shown.
P053
P052
D033
D036
D031
D031
45
Your parts
1. D037 - Starboard landing gear
wall
2. P056 - Starboard mainwheel
hydraulics mount
3. D038 - Starboard mainwheel
hydraulics shaft
4. D039 - Starboard mainwheel
hydraulics pivot
5. P057 - Starboard mainwheel
hydraulics cylinder
HM screws 1.7x5 mm (2 pieces)
Assembly
Stage 18: Starboard
mainwheel hydraulics
1 Insert the pins of the
starboard mainwheel
hydraulics mount (P056)
into the holes in the
starboard mainwheel
hydraulics cylinder (P037).
Press both parts together.
D037
D038
D039
P056
P057
HM
P056
P057
46
2 Insert the starboard mainwheel hydraulics pivot (D039) into the end of the cylinder, as shown, and secure with an
HM screw.
3 Carefully insert the
starboard mainwheel
hydraulics shaft (D038) into
the cylinder (P057). Test
that the shaft can move in
and out of the cylinder.
4 This stage is now
complete. Keep
any unused or
leftover parts to
one side.
P057 D039
P057 D038
47
Your parts
1. P058 - Tyre
2. D040 - Drum
3. P059 - Cap
4. P060 - Drive
5. D041 - Wheel axle and rod
6. P061 - Sleeve
IM screws 1.7 × 3 × 4 mm
(2 pieces)
Stage 19: The starboard
mainwheel
D040
D041
P058
P059
P060
P061
IM
Assembly
1 Place the tyre (P058) into a container of hot water to soften it. Then, take it out of the water and
carefully insert the drum (D040) into it.
P058 P058
D040
48
P060 D041
2 Insert the wheel
axle and rod
(D041) into the
hole in the disc
(P060).
3 Fit the sleeve
(P061) onto
the axle and
disk. Fix it in
place with
an IM screw.
4 Insert the sleeve at the end of
the assembly into the drum.
5 Fit the cap
(P059) into the
drum (D034),
as shown. This
stage is now
complete.
D040
P061
D040
P059
49
Your parts
1. P062 - Starboard main landing gear
suspension socket
2. P063 - Starboard main landing gear
suspension
3. D042 - Starboard main landing gear
suspension mounting bracket
4. P064 - Starboard main landing gear
suspension lower link
5. P065 - Starboard main landing gear
suspension upper link
6. X002 - Starboard main landing gear
suspension spring
DM screws 1.7x4 mm (2 pieces),
JM screws 2.0x6 mm (2 pieces),
DP screws 1.7x6 mm (3 pieces),
EP screws 1.7x5 mm (3 pieces),
CM screws 1.7 x 3.5mm (2 pieces).
Stage 20: The starboard
main landing gear
Assembly
1 Retrieve the assemblies from
Stages 18 and 19. Secure the
lower link (P064) to the wheel
axle with a DP screw.
P062
P064
DM
JM
DP
EP
CM
P065
P063
D042X002
P064
D041
50
2 Fix the upper link (P065) to the lower (P064) with
an EP screw. 3 Insert the shock absorber spring (X002) into the
starboard main landing gear support (P063).
4 Insert the rod into the support onto the spring. 5 Secure the upper link (P065) to the support (P063)
with a DP screw.
6 Fix the mounting
bracket(D042) to the
support (P063) with an
EP screw.
P064
P065
P065
P063
P063
D041
X002
P063
D042P063
51
7 Place the end of the starboard mainwheel
hydraulics shaft into the bracket (D042) and
secure it with a JM screw.
8 Insert the end of the support into the starboard
landing gear wall, as shown.
9 Place the end of the support into the socket (P062).
Then secure the socket to the wall with a DM screw.
10 Secure the starboard mainwheel hydraulic pivot
(D039) to the end of the wall with a CM screw.
11 This stage is now complete. Check that
the landing gear can move away from and
towards the wall, as shown.
D042
D037
D037 D039D037
D038
P063
P062
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Roland BR-1600CD Owner's manual
-
-
-
Siemens MIDIMASTER Vector Operating Instructions Manual
-
-
Stober CM400/3 User manual
-
Siemens G85139 User manual
-
GRAPHTEC CS610-11eN User manual
-
WEG SSW06 User manual
-