2. Deagostini
  3. Cutty Sark

Deagostini Cutty Sark User guide

  • Hello! I've reviewed the user manual for the Cutty Sark ship model. It describes the final stages of assembly, including checking the model against 1:1 scale pictures, and the construction of the display plinth. I'm here to assist you with any questions you may have about this document.
  • What is the final step after model building?
    What should be checked before making display plinth?
    What should be fit and glued onto the plinth?
85 THE CUTTY SARK: STEP BY STEP
Completed ship
80
80Your model is now complete, so check against the 1:1 scale
pictures and mast and sail plans to ensure everything is in its
correct place and nothing has been missed. The last thing to do is to
make the display plinth.
84 THE CUTTY SARK: STEP BY STEP86 THE CUTTY SARK: STEP BY STEP
Finishing the plinth
81
81Fit and glue the plinth supports, centring them
correctly, and the ship’s name plate onto the
plinth. Carefully place Cutty Sark on the plinth.
Congratulations! You now have a fantastic model of the
most famous tea clipper ever.
/