39 40
INDEX
GUARANTEE..............................................................................
41
TECHNICAL DATA .......................................................................
42
OPENING THE LID – LOADING .................................................
43
DETERGENT DISPENSER ........................................................
44
VARIABLE CAPACITY .................................................................
45
PROGRAMME SELECTION .......................................................
45
CONTROL DESCRIPTION
Mod. CTE 76 T ...................................................................
46
Mod. CTE 84 TV ................................................................
48
Mod. CTE 106 TV ..............................................................
51
TABLE OF PROGRAMMES .......................................................
54
page
Place the adhesive label, in the
corresponding language, in the
support that slots into the back of the
panel display.
EN
This Instruction Manual
contains everything you need to
know about the everyday
running of your machine. Keep
it for future reference.
An Installation and
Maintenance Manual is also
provided which you should
consult during the installation
and routine maintenance of
your washing machine. The ma-
nual also contains information
about possible working
problems, advice about the
wash load, an explanation of
label symbols and hints about
how to remove stubborn stains.
INTRODUCTION
Read this manual carefully as it offers practical advice to help you get the most from your
washing machine.
1.- CONTROL PANEL
2.- LID
3.- DRUM
4.- DETERGENT COMPARTMENT
5.- FILTER DOOR
6.- FILTER
When contacting a CANDY or one of its Technical Assistance Centre
always refer to the model (see control panel) and the registration and
series numbers which are indicated at the bottom of the machine under
the lower panel or on the warranty certificate. That is to say, everything
that appears in the box.
Providing this information will ensure a faster and more efficient service.
CTE 76 T
4,5
230
175
300
30
1.950
2.200
10
0,05 min.
0,8 max.
750
54
1,03
B
41 42
TECHNICAL DATA
Load capacity ........................................................... kg.
Voltage ....................................................................... V.
Wash motor power rating .......................................... W.
Spin motor power rating ............................................ W.
Electropump power rating ......................................... W.
Heating element power rating ................................... W.
Max. power input ....................................................... W.
Fuse ........................................................................... A.
Water pressure ....................................................... MPa
Spin speed ................................................... r.p.m./min
Water consumption (60º C programme) .................... lit.
Energy consumption (60º C programme) / 4,5 kg .. kWh
Energy efficiency rating .................................................
CTE 84 TV
4,5
230
175
300
30
1.950
2.200
10
0,05 min.
0,8 max.
800
54
0,85
A
CTE 106 TV
4,5
230
175
340
30
1.950
2.200
10
0,05 min.
0,8 max.
1000
54
0,85
A
GUARANTEE
1.
The appliance comes with a guarantee certificate.
2.
Complete part B and keep it in a safe place. It should
be presented to the Technical Assistance Centre in
the event of a repair being necessary along with the
legal receipt issued by the dealer on purchase.
3.
Do not forget to send part A of the Guarantee
Certificate to be validated within 15 days of purchase.
43 44
OPENING THE DRUM
1.
Lift the lid (A) and open completely. Next open the drum
door following these instructions:
2.
Press catch (B) and kept it pressed down.
Press the first shutter (C) to unlock the two shutters (C)
and (D).
3.
Open the second shutter (D). Open the first shutter (C).
Place the washing in the drum.
4.
Close the first shutter (C).
Close the second shutter (D) so that the catch on the first
shutter fits correctly into the slot. Release.
5.
Ensure that both shutters are perfectly aligned and properly
closed.
IMPORTANT: IT IS IMPORTANT TO MAKE SURE THAT
THE DRUM IS CAREFULLY CLOSED BEFORE
OPERATING THE MACHINE, OTHERWISE THE MACHINE
OR LAUNDRY COULD GET DAMAGED.
2 min.
IMPORTANT: A SPECIAL
SAFETY DEVICE PREVENTS
THE LID FROM BEING
OPENED IMMEDIATELY
AFTER THE WASH HAS
FINISHED. ONCE THE SPIN
CYCLE HAS FINISHED, WAIT
FOR 2 MINUTES BEFORE
TRYING TO OPEN THE LID.
FRONT OF THE
WASHING
MACHINE
D
C
FRONT OF THE
WASHING
MACHINE
D
C
FRONT OF THE
WASHING
MACHINE
C
B
D
WASHING
MACHINE LID
A
FRONT OF THE
WASHING
MACHINE
C
D
DETERGENT DISPENSER
The detergent dispenser is divided into 4 compartments:
• Compartment I, is for prewash powder detergent. The recommended quantity is 60
gm of detergent (for 4,5 kg of laundry).
• Compartment II, is for wash powder detergent. The recommended quantity is 120
gm of detergent (for 4,5 kg of laundry).
• The compartment is for bleach. The recommended quantity is 7 cl.
• The compartment is for fabric conditioners, scenting agents and special
additives. The recommended quantity is 5 cl.
The detergent compartment has two guidance lines:
• RECOMMENDED (lower line). This indicates the recommended level for the prewash
and wash compartments.
• MAX. This indicates the maximum level which should never be exceeded.
MAXIMUM
(wash)
MAXIMUM
(bleach and scenting agent)
MAXIMUM
(prewash)
RECOMMENDED
CONTROL DESCRIPTION
Programme selector knob ...........................................................
Temperature selector knob .........................................................
Spin variation button 750/400 .....................................................
Super-rapid button ......................................................................
ON/OFF pilot light .......................................................................
ON/OFF button ...........................................................................
A
B
D
E
G
H
45 46
CTE 76 T
VARIABLE CAPACITY
This washing machine automatically adapts the water level to the type and quantity of clothes
to be washed. So it is possible to obtain a «customised» wash, even in terms of energy. This
system reduces water and energy consumption and provides an appreciable reduction in
wash time.
PROGRAMME SELECTION
WHEN SELECTING A PROGRAMME, ENSURE THAT THE START/STOP BUTTON IS NOT
ACTIVATED.
To select a programme:
• Programmes are selected by means of the corresponding control knob (A). See the
table of programmes.
• Select the wash temperature by means of the corresponding control knob.
• Select the spin speed by means of the corresponding control knob.
(Mod. CTE 84 TV - Mod. CTE 106 TV)
• Select the different options available by pressing the corresponding buttons.
USE OF THE SELECTION CONTROLS
A
. PROGRAMME SELECTOR KNOB
With this knob you can select the wash programme as you
wish. Press the knob and turn it until the programme (number
or symbol) coincides with the marker point.
ALWAYS ROTATE the control in a clockwise direction, never
in an anticlockwise direction. Do not press the “on” button (H)
before selecting the programme
.
If you wish to modify the position of the control or select
another programme once a cycle has commenced, press
the On/Off button. Press again to recommence once the
modification has been completed.
B
. TEMPERATURE SELECTOR KNOB
With this knob you can select the washing temperature as
you wish. Press the knob and turn it until the temperature
desired coincides with the marker point.
If you wish to carry out a cold wash, turn the knob until the
cold symbol coincides with the selector mark.
THE KNOB CAN BE TURNED IN BOTH DIRECTIONS.
Do not exceed the maximum temperature recommended for
each cycle in the table of programmes.
D
. SPIN VARIATION BUTTON 750/400
When this button is pressed, the spin after the last rinse will be at 400 r.p.m.
instead of 750 r.p.m.
F
. SUPER RAPID BUTTON
When this button is pressed the time for the wash programmes of this washing
machine is reduced to a maximum of 50 minutes, according to the wash
programme and temperature selected. The Super Rapid Button can be used
for washes of from 1 to 4.5 kg.
G
. ON/OFF PILOT LIGHT
H
. ON/OFF BUTTON
47
48
CONTROL DESCRIPTION
Programme selector knob ...........................................................
Temperature selector knob .........................................................
Spin speed selector knob ...........................................................
Flot button (Anticreasing) ............................................................
Super-rapid button ......................................................................
ON/OFF pilot light .......................................................................
ON/OFF button ...........................................................................
A
B
C
D
E
G
H
CTE 84 TV
49 50
USE OF THE SELECTION CONTROLS
A
. PROGRAMME SELECTOR KNOB
With this knob you can select the wash programme as you
wish. Press the knob and turn it until the programme (number
or symbol) coincides with the marker point.
ALWAYS ROTATE the control in a clockwise direction, never
in an anticlockwise direction. Do not press the “on” button (H)
before selecting the programme
.
If you wish to modify the position of the control or select
another programme once a cycle has commenced, press
the On/Off button. Press again to recommence once the
modification has been completed.
B
. TEMPERATURE SELECTOR KNOB
With this knob you can select the washing temperature as
you wish. Press the knob and turn it until the temperature
desired coincides with the marker point.
If you wish to carry out a cold wash, turn the knob until the
cold symbol coincides with the selector mark.
THE KNOB CAN BE TURNED IN BOTH DIRECTIONS.
Do not exceed the maximum temperature recommended for
each cycle in the table of programmes.
USE OF THE SELECTION CONTROLS
C
. SPIN SPEED SELECTOR KNOB
This control allows you to select the speed of the final spin.
To select a speed, press the centre of the control knob to
release and turn it until the desired speed coincides with the
selector mark. When you have selected a speed, press the
control knob once again.
This knob selects the final spin speed. To select a speed,
press down and turn until the desired speed coincides with
the selector mark.
The final spin cycle reaches the maximum speed selected in
non-delicate programmes. The middle and final spin cycles
for mixed, synthetics and delicate programmes is carried out
at 400 r.p.m.
If you do not want a spin cycle, coincide the spin exclusion
symbol with the selector mark.
THE KNOB CAN BE TURNED IN BOTH DIRECTIONS.
D
. FLOT-BUTTON
This button works in all programmes except the 32-minute cycle.
When it is pressed, the machine stops on the last rinse, leaving the clothes
soaking in a full drum of water.
To complete the programme and spin the clothes, press the button again to
release it.
Don not press this button if the «high-speed spin» (cotton) programme
is selected.
E
. SUPER RAPID BUTTON
When this button is pressed the time for the wash programmes of this washing
machine is reduced to a maximum of 50 minutes, according to the wash
programme and temperature selected. The Super Rapid Button can be used
for washes of from 1 to 4.5 kg.
G
. ON/OFF PILOT LIGHT
H
. ON/OFF BUTTON
51
CONTROL DESCRIPTION
Programme selector knob ...........................................................
Temperature selector knob .........................................................
Spin speed selector knob ...........................................................
Flot button (Anticreasing) ............................................................
Super-rinse button ......................................................................
ON/OFF pilot light .......................................................................
ON/OFF button ...........................................................................
A
B
C
D
E
G
H
CTE 106 TV
52
USE OF THE SELECTION CONTROLS
A
. PROGRAMME SELECTOR KNOB
With this knob you can select the wash programme as you
wish. Press the knob and turn it until the programme (number
or symbol) coincides with the marker point.
ALWAYS ROTATE the control in a clockwise direction, never
in an anticlockwise direction. Do not press the “on” button (H)
before selecting the programme
.
If you wish to modify the position of the control or select
another programme once a cycle has commenced, press
the On/Off button. Press again to recommence once the
modification has been completed.
B
. TEMPERATURE SELECTOR KNOB
With this knob you can select the washing temperature as
you wish. Press the knob and turn it until the temperature
desired coincides with the marker point.
If you wish to carry out a cold wash, turn the knob until the
cold symbol coincides with the selector mark.
THE KNOB CAN BE TURNED IN BOTH DIRECTIONS.
Do not exceed the maximum temperature recommended for
each cycle in the table of programmes.
53
USE OF THE SELECTION CONTROLS
C
. SPIN SPEED SELECTOR KNOB
This control allows you to select the speed of the final spin.
To select a speed, press the centre of the control knob to
release and turn it until the desired speed coincides with the
selector mark. When you have selected a speed, press the
control knob once again.
This knob selects the final spin speed. To select a speed,
press down and turn until the desired speed coincides with
the selector mark.
The final spin cycle reaches the maximum speed selected in
non-delicate programmes. The middle and final spin cycles
for mixed, synthetics and delicate programmes is carried out
at 400 r.p.m.
If you do not want a spin cycle, coincide the spin exclusion
symbol with the selector mark.
THE KNOB CAN BE TURNED IN BOTH DIRECTIONS.
D
. FLOT-BUTTON
This button works in all programmes except the 32-minute cycle.
When it is pressed, the machine stops on the last rinse, leaving the clothes
soaking in a full drum of water.
To complete the programme and spin the clothes, press the button again to
release it.
Don not press this button if the «high-speed spin» (cotton) programme
is selected.
E
. SUPER-RINSE BUTTON
Pressing this button removes the last vestiges of soap powder from the
fabrics, as the rinses are done with more water.
G
. ON/OFF PILOT LIGHT
H
. ON/OFF BUTTON
54 55
NORMAL SOILING
COLOURS FAST
COLOURS DELICATES
DELICATE RINSES
DELICATE RINSE
DELICATE SPIN
NOTE:
1. If the wash load is very dirty it is best to reduce the load weight to 3 kg.
2. Programmes 1, 2 have an automatic bleaching option. Simply place the bleaching agent in
the compartment.
3. The washing machine is designed to incorporate fabric softener automatically in the last
rinse of each washing cycle.
RAPID 32 MINUTE PROGRAMME
The rapid 32 minute programme enables a complete washing cycle
for a maximum 2 kg wash at a temperature of 50°C to be carried out in
30 minutes. The temperature of the wash can be reduced via the
temperature selector knob.
The soap powder must be loaded into the pre-wash dispenser
(compartment I).
The maximum amount of soap powder which can be used for this
programme is indicated by the 32 minute mark in the dispenser.
The rapid 32 minute programme can also be used as a pre-wash cycle
in the case of a heavily soiled wash, following with the main programme
as desired.
DELICATES
WOLL
«Machine washable»
HAND WASH
DELICATE RINSES
DELICATE RINSE
DELICATE SPIN
WATER DISCHARGE
INTENSIVE WITH PREWASH
NORMAL SOILING
COLOURS FAST
COLOURS DELICATES
BLEACH
Organic stains
ENERGETIC RINSES
ENERGETIC RINSE
ENERGETIC SPIN
TABLE OF PROGRAMMES
SEL.
PROG.
I
II
MAX.
LOAD
IN KG
TYPE OF
FABRIC
PROGRAMME
DETERGENT
SEL.
T
Cº
2
2
2
—
—
—
MIXED SYNTHETICS
RESISTANTS
4,5
4,5
4,5
3,5
—
—
—
—
•
•
•
•
•
•
•
•
•
•
•
•
•
•
8
9
10
Z
1,5
1
1,5
—
—
—
—
From cold
to
…40º
From cold
to
…40º
From cold
to
…30º
—
—
—
—
•
•
•
•
•
•
•
•
EXTREM. DELIC. FABRICS
5
6
7
•
•
•
•
•
•
•
•
From cold
to
…60º
From cold
to
…50º
From cold
to
…40º
—
—
—
From cold
to
…90º
From cold
to
…90º
From cold
to
…60º
From cold
to
…40º
—
—
—
—
RAPID PROGRAMME
Rapid 32 minute super cycle
32´2
From cold
to
…50º
•
1
2
3
*
4
•
Programme
*
, according to EN 60456 Regulations
The first program in each group is the longest and thus ensures the most effective wash at a given
temperature. The other programs should be selected for clothes which are only lightly solied or are
particularly delicate.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
Candy LBCTE84TVES User manual
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Hoover LBHTC 243 UK User manual
-
-
Otsein-Hoover LBOHTC 203 User manual
-
-
-
Otsein LB LTO109A User manual
-
-
-
Otsein-Hoover LB LTOH46 C User manual
-
