Otsein LB LTO109A User manual

Brand
Otsein
Model
LB LTO109A
Type
User manual

This manual is also suitable for

27
EN
When contacting a OTSEIN or one of its Technical Assistance Cen-
tre always refer to the model (see control panel) and the registration
and series numbers which are indicated at the bottom of the machine
under the lower panel or on the warranty certificate. That is to say,
everything that appears in the box.
Providing this information will ensure a faster and more efficient service.
INTRODUCTION
Read this manual carefully as it offers practical advice to help you get the most from your
washing machine.
This Instruction Manual
contains everything you need to
know about the everyday
running of your machine. Keep
it for future reference.
An Installation and
Maintenance Manual is also
provided which you should
consult during the installation
and routine maintenance of
your washing machine. The ma-
nual also contains information
about possible working
problems, advice about the
wash load, an explanation of
label symbols and hints about
how to remove stubborn stains.
1.- CONTROL PANEL
2.- LID
3.- DRUM
4.- DETERGENT COMPARTMENT
5.- FILTER DOOR
6.- FILTER
7.- WHEEL TROLLEY
28
INDEX
TECHNICAL DATA .......................................................................
29
OPENING THE LID – LOADING ................................................
30
DETERGENT DISPENSER ........................................................
31
SAFETY AQUABLOCK ................................................................
32
VARIABLE CAPACITY .................................................................
32
PROGRAMME SELECTION .......................................................
32
CONTROL DESCRIPTION .........................................................
33
TABLE OF PROGRAMMES .......................................................
36
page
29
TECHNICAL DATA
Load capacity .........................................................
kg.
Voltage ......................................................................
V.
Wash motor power rating .........................................
W.
Spin motor power rating ...........................................
W.
Electropump power rating ........................................
W.
Heating element power rating ..................................
W.
Max. power input .....................................................
W.
Fuse .........................................................................
A.
Water pressure ....................................................
MPa
Spin speed ...............................................
r.p.m./min
Water consumption (60º C programme) ..................
lit.
Energy consumption (60º C programme) ............
kWh
Energy efficiency rating ................................................
4,5
230
175
340
30
1.950
2.200
10
0,05 min.
0,8 max.
1000
54
0,85
A
4,5
230
125
400
30
1.950
2.200
10
0,05 min.
0,8 max.
1200
54
0,85
A
LTO 109 A LTO 129 A
30
OPENING THE DRUM
1.
Lift the lid (A) and open completely. Next open the drum
door following these instructions:
2.
Press catch (B) and kept it pressed down.
Press the first shutter (C) to unlock the two shutters (C)
and (D).
3.
Open the second shutter (D). Open the first shutter (C).
Place the washing in the drum.
4.
Close the first shutter (C).
Close the second shutter (D) so that the catch on the first
shutter fits correctly into the slot. Release.
5.
Ensure that both shutters are perfectly aligned and properly
closed.
IMPORTANT: IT IS IMPORTANT TO MAKE SURE THAT
THE DRUM IS CAREFULLY CLOSED BEFORE
OPERATING THE MACHINE, OTHERWISE THE
MACHINE OR LAUNDRY COULD GET DAMAGED.
2 min.
IMPORTANT: A SPECIAL
SAFETY DEVICE PREVENTS
THE LID FROM BEING
OPENED IMMEDIATELY
AFTER THE WASH HAS
FINISHED. ONCE THE SPIN
CYCLE HAS FINISHED, WAIT
FOR 2 MINUTES BEFORE
TRYING TO OPEN THE LID.
FRONT OF THE
WASHING
MACHINE
D
C
FRONT OF THE
WASHING
MACHINE
D
C
FRONT OF THE
WASHING
MACHINE
C
B
D
WASHING
MACHINE LID
A
FRONT OF THE
WASHING
MACHINE
C
D
31
I
II
MAX.
MAX.
MAX.
DETERGENT DISPENSER
The detergent dispenser is divided into 4 compartments:
• Compartment I, is for prewash powder detergent. The recommended quantity is
60 gm of detergent (for 4,5 kg of laundry).
• Compartment II, is for wash powder detergent. The recommended quantity is 120
gm of detergent (for 4,5 kg of laundry).
• The compartment is for bleach. The recommended quantity is 7 cl.
• The compartment is for fabric conditioners, scenting agents and special
additives. The recommended quantity is 5 cl.
The detergent compartment has two guidance lines:
• RECOMMENDED (lower line). This indicates the recommended level for the prewash
and wash compartments.
• MAX. This indicates the maximum level which should never be exceeded.
MAXIMUM
(wash)
MAXIMUM
(bleach and scenting agent)
MAXIMUM
(prewash)
RECOMMENDED
32
VARIABLE CAPACITY
This washing machine automatically adapts the water level to the type and quantity of clothes
to be washed. So it is possible to obtain a «customised» wash, even in terms of energy. This
system reduces water and energy consumption and provides an appreciable reduction in
wash time.
PROGRAMME SELECTION
WHEN SELECTING A PROGRAMME, ENSURE THAT THE START/STOP BUTTON IS
NOT ACTIVATED.
To select a programme:
• Programmes are selected by means of the corresponding control knob (A). See the
table of programmes.
• Select the wash temperature by means of the corresponding control knob.
• Select the spin speed by means of the corresponding control knob.
• Select the different options available by pressing the corresponding buttons.
SAFETY AQUABLOCK
(Mod. LTO 129 A)
This appliance is fitted with a safety system (aquablock), which
ensures maximum freedom from anxiety for users. A water leak de-
tector sensor located along the inlet pipe and the devoce fitted to the
tap, automatically block the flow of water in the case of accidental
leaks. Even without electricity supply.
33
LTO 109 A
LTO 129 A
CONTROL DESCRIPTION
PROGRAMME SELECTOR KNOB ............................................
- PROGRAMME STAGE DISPLAY .................................
- TIME REMAINING DISPLAY ........................................
TEMPERATURE SELECTOR KNOB .........................................
SPIN SPEED SELECTOR KNOB ...............................................
SUPER RINSE BUTTON ............................................................
INTENSIVE WASH BUTTON .....................................................
ANTI-CREASING BUTTON ........................................................
ON/OFF PILOT LIGHT ...............................................................
ON/OFF BUTTON ......................................................................
SELECTOR MARK .....................................................................
A
f
t
B
C
D
E
F
G
H
L
34
USE OF THE SELECTION CONTROLS
A
. PROGRAMME SELECTOR KNOB
To select the desired wash programme, turn this control
until the line (L) coincides with the programme number or
symbol.
ALWAYS ROTATE the control in a clockwise direction,
never in an anticlockwise direction. Do not press the “on”
button (H) before selecting the programme
.
If you wish to modify the position of the control or select
another programme once a cycle has commenced, press
the Start/Stop key. Press again to recommence once the
modification has been completed.
f
. PROGRAMME STAGE DISPLAY
This displays the current programme stage throughout the programme
selected.
WASH: STOP WITH WATER IN DRUM:
RINSE: END OF PROGRAMME:
FINAL SPIN:
t
. TIME REMAINING DISPLAY
This displays the Approx. time remaining in minutes to the end of the
programme.
B
. TEMPERATURE SELECTOR KNOB
To select the desired wash temperature, turn this control
until the line (L) coincides with the desired temperature.
If you wish to carry out a cold wash, turn the knob until the
cold symbol coincides with the selector mark.
THE KNOB CAN BE TURNED IN BOTH DIRECTIONS.
Do not exceed the maximum temperature recommended
for each cycle in the table of programmes.
LTO 109 A
LTO 129 A
35
USE OF THE SELECTION CONTROLS
C
. SPIN SPEED SELECTOR KNOB
To select the final spin speed, turn this control until the line
(L) coincides with the desired rpm.
This knob selects the final spin speed. To select a speed,
press down and turn until the desired speed coincides with
the selector mark.
The final spin cycle reaches the maximum speed selected
in non-delicate programmes. The middle and final spin
cycles for mixed, synthetics and delicate programmes is
carried out at 400 r.p.m.
If you do not want a spin cycle, coincide the spin exclusion
symbol with the selector mark.
THE KNOB CAN BE TURNED IN BOTH DIRECTIONS.
D
. SUPER-RINSE BUTTON
Pressing this button removes the last vestiges of soap powder from the
fabrics, as the rinses are done with more water. Programmes 1-2-3-4.
E
. INTENSIVE WASH BUTTON
Use the intensive wash button for cotton programmes (1-2-3-4).
When the button is pressed, the selected temperature is kept constant during
all the phases of the wash cycle.
This feature combined with a sustained mechanical action results in excellent
washing results with resistant and particularly dirty fabrics.
F
. ANTI-CREASING BUTTON
This button works in all programmes except the 34-minute cycle.
It can be used to minimise wrinkling of fabrics during wash programmes.
The results obtained differ with each programme:
In programmes for NORMAL FABRICS, pressing this button will cause the machine to
stop on the last rinse, leaving clothes soaking in water.
To complete the programme and spin the clothes, press the button again to release it.
In programmes for SYNTHETIC FABRICS, pressing this button will cut out the intermedi-
ate spins and perform only one final spin at low sped, thus minimising the stress suffered by
fabrics.
In programmes for HIGHLY DELICATE FABRICS, pressing this button will cause the
machine to stop on the last rinse, leaving clothes soaking in water.
To complete the programme and spin the clothes, press the button again to release it.
Do not press this button if the “vigorous spin” (normal fabrics) programme is
selected.
G
. ON/OFF PILOT LIGHT
H
. ON/OFF BUTTON
LTO 109 A
LTO 129 A
36
From cold to
…40º
From cold to
…40º
From cold to
…30º
—
—
—
From cold to
…60º
From cold to
…50º
From cold to
…40º
—
—
—
8
9
10
Z
HEAVILY SOILED CLOTHES
NORMALLY SOILED CLOTHES
DELICATE COLOURS
DELICATE RINSES
DELICATE RINSE
GENTLE SPIN
DELICATE
WOOL
(“Machine washable”)
DELICATE SYNTHETICS
DELICATE RINSES
DELICATE RINSE
GENTLE SPIN
EMPTYING
Emptying only
5
6
7
TABLE OF PROGRAMMES
HEAVILY SOILED CLOTHES (PRE-WASH)
NORMALLY SOILED CLOTHES
FAST COLOURS
DELICATE COLOURS
BLEACH/ WHITENING
Organic stains
VIGOROUS RINSES
VIGOROUS RINSE
VIGOROUS SPIN
PROG.
SEL.
1
2
*
3
4
I
II
•
4,5
4,5
4,5
3,5
—
—
—
—
MAX.
LOAD
IN kg.
TYPE OF FABRIC
PROGRAMME FOR
WASHING POWDER LOAD
MAX. TEMP.
SEL.
ºC
•
•
•
•
•
•
•
•
•
•
•
•
•
•
2
2
2
—
—
—
•
•
•
•
•
•
•
•
1,5
1
1,5
—
—
—
—
•
•
•
•
•
•
•
•
From cold to
…90º
From cold to
…90º
From cold to
…60º
From cold to
…40º
—
—
—
The first program in each group is the longest and thus ensures the most effective wash at a given temperature. The
other programs should be selected for clothes which are only lightly soiled or are particularly delicate.
Programme
*
, as per IEN standard 60456.
FAST WASH PROGRAMME
Super-fast 34 minute cycle 2 34´
•
From cold to
…50º
RESISTANTS
MIXED
SYNTHETICS
EXTREM. DELIC.
FABRICS
37
NOTES:
1. For highly soiled clothes, it is advisable to reduce the load to no more than 3 kg.
2. For automatic whitening in programmes 1 and 2, pour bleach into the bleach
drawer .
3. The washing machine is designed to incorporate fabric softener automatically in the last
rinse of each washing cycle.
34-MINUTE FAST PROGRAMME
This programme completes a full wash cycle in 34
minutes for up to 2 kg of clothes at 50ºC. Wash
temperature can be lowered via the temperature
selector.
Pour washing powder into the pre-wash compartment
(compartment 1).
The 34-minute fast programme can also be used as
a pre-wash cycle with particularly heavily soiled
clothes. Just select the desired main programme
afterwards.
38
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Otsein LB LTO109A User manual

Brand
Otsein
Model
LB LTO109A
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents