Focal Point Seem 1 Indirect FSM1IS Installation guide

Brand: Focal Point

Model: Seem 1 Indirect FSM1IS

Type: Installation guide

Seem® 1 Indirect

Suspended | FSM1IS

• Congurationsarerunspecic,

pleaseconsultfactorydrawings

beforebeginninginstallation.

• Luminaires must be installed by a qualied

electrician (check with local and national

codes for proper installation).

• To prevent electrical shock, disconnect

electrical supply before installation or

servicing.

• Contractor is responsible for adequately

reinforcing walls and/or ceilings to support

xture weight.

• Focal Point, LLC accepts no responsibility

for inadequately reinforced walls and/or

ceilings.

• The information contained in this drawing

is the sole property of Focal Point, LLC.

Any reproduction in part or whole without

the written permission of Focal Point, LLC

is prohibited.

POWER OFF

POWER ON

ATTENTION

SEE ADDITIONAL

INSTRUCTIONS

BEFORE YOU BEGIN COMPONENT KEY

INSTRUCTION KEY

FOCAL POINT SHIPPED INSTALLED

FOLLOW FOCAL POINT

INSTRUCTIONS FOR UNIVERSAL

SUSPENSION SYSTEM ASSEMBLY.

SEE IS0166

U - Individual

S - Start of Run

I - Intermediate

E - End of Run

Gripper Plate

(A43706-01)

Joiner A

(A44446-01)

Joiner B

(A43624-01)

Joiner B Ramp

(A43940-01)

INDIVIDUAL INSTALLATIONS

FOLLOWSTEPS1,2,3&11

INDIRECT ASYMMETRIC OPTIC

Wall Asymmetric

Distribution Direction

Power Feed

Power

Feed

Asymmetric Distribution Direction

DRIVER SERVICE

Center joiner plate between luminaires

Avoid all contact with LED surface,

LEDs are easily damaged!

Focal Point Seem 1 Indirect FSM1IS Installation guide

Focal Point Seem 1 Indirect FSM1IS Installation guide

Focal Point Seem 1 Indirect FSM1IS Installation guide

Related papers

Other documents