2. Deagostini
  3. Cutty Sark

Deagostini Cutty Sark User guide

  • Hello! I've reviewed the user manual for the Cutty Sark model ship. This document provides detailed step-by-step instructions on how to assemble the model, focusing on planking the decks and assembling the bulwarks. I'm ready to answer any questions you have about the construction process.
  • What are the sapele hull plates used for?
    What material are the battens made of?
    Where do you start lining the deck?
6Planking the decks and the bridgedeck bulwarks
6Place one of the sapele hull plates 32 at different heights,
both on the bow and on the stern, to ensure that it fits
with the contours of the hull. Plate the front part of the stern
bulkhead 16 with the basswood battens 28. Line the deck 27
with the basswood battens 28, starting from the amidship line
(broken red lines) to the ends. Nail and glue the bridgedeck
bulwarks 29, ensuring that they are at the same level of the
stern deck plate.
6 THE CUTTY SARK: STEP BY STEP
32 32
27
29
26
28
28
16
28
/