Soil
Directions for constructing your SnapFence
TM
Starter Kit.
IF YOU CAN DREAM IT, YOU CAN BUILD IT.
Starter Kit
Instructions
1
1) Unpack box and separate parts.
Solid Mount:
2) Mark out the fence line with a string.
Solid Mount:
3) Install base mounts along string at 48” center to center.
Solid Mount:
4) Attach posts (39”) to base mounts with screws.
Attach with PVC glue if desired.
6) Snap rail sections onto posts (39”). Measure and move rails to desired levels. Secure with screws on both ends.
7) Push on post caps. Attach with PVC glue if desired.
* Finish with pre-cut Wire SnapPanels.
Continue to add to your project with the SnapFence
TM
Extension Kit, (sold separately.)
(3) 39” Posts
(4) 46” Rails
(8)
Rail
Connectors
(2)
Bag of
Screws
(3)
Post
Caps
(3)
Base
Mounts
CenterLine CenterLine
String Line
Solid
48”
Solid
Soil Mount:
3) Install anchor stakes along string at 48” center to center.
OR
CenterLine CenterLine
48”
Soil
Solid
Soil Mount:
4) Attach posts (39”) to anchor stakes with screws.
OR
OR
Soil Mount:
2) Mark out the fence line with a string.
Soil
Measure and move
rails to desired levels.
Secure with screws
on both ends.
5) Attach rail connectors to each end of rails (46”).
Part Number: SK-3x8W
Fence Starter Kit Wire SnapPanel
(4)
Corner Rail
Connectors
Anchor stakes
sold separately.
(3)
Anchor
Stakes
CenterLine
48”
String Line
CenterLine
48”
String Line
String Line
Secure with screws
on both ends.
*Finish with pre-cut wire SnapPanels.
Attach wire with Panel Clips.
Use Screws to attach clips.
(2)
Wire
SnapPanels
(2)
Bags of
Panel Clips
Secure with PVC glue if
desired.
>Use corner rail connectors if making fence turn a corner.
Visit: www.snap-
fence.com for more
How-To help. Scan the
QR code to take you
directly to useful
SnapFence tips.