Soil
Directions for constructing your SnapFence
TM
Starter Kit.
IF YOU CAN DREAM IT, YOU CAN BUILD IT.
Starter Kit
Instructions
1
1) Unpack box and separate parts.
Solid Mount:
2) Mark out the fence line with a string.
Solid Mount:
3) Install base mounts along string at 48” center to center.
Solid Mount:
4) Attach posts (39”) to base mounts with screws.
Attach with PVC glue if desired.
6) Snap rail sections onto posts (39”). Measure and move rails to desired levels. Secure with screws on both ends.
7) Push on post caps. Attach with PVC glue if desired.
* Finish with pre-cut Lattice Panels
or pre-cut Wire SnapPanels (sold seperately).
Continue to add to your project with the SnapFence
TM
Extension Kit, (sold separately.)
(3) 39” Posts
(4) 46” Rails
(8)
Rail
Connectors
(2)
Bag of
Screws
(3)
Post
Caps
(3)
Base
Mounts
CenterLine CenterLine
String Line
Solid
48”
Solid
Soil Mount:
3) Install anchor stakes along string at 48” center to center.
OR
CenterLine CenterLine
48”
Soil
Solid
Soil Mount:
4) Attach posts (39”) to anchor stakes with screws.
OR
OR
Soil Mount:
2) Mark out the fence line with a string.
Soil
Measure and move
rails to desired levels.
Secure with screws
on both ends.
5) Attach rail connectors to each end of rails (46”).
Part Number: SK-3x8
Fence Starter Kit
(4)
Corner Rail
Connectors
*Finish with pre-cut lattice panels.
Attach lattice with provided screws.
Screw directly through lattice panel.
Anchor stakes
sold separately.
(3)
Anchor
Stakes
CenterLine
48”
String Line
CenterLine
48”
String Line
String Line
Secure with screws
on both ends.
*Finish with pre-cut wire SnapPanels.
Attach wire with Panel Clips (sold
seperately). Use Screws to attach clips.
OR
Secure with PVC glue if
desired.
>Use corner rail connectors if making fence turn a corner.
Visit:
www.snapfence.com
for more How-To help.
Scan the QR code to
take you directly to
useful SnapFence tips.
/
