Soil
Directions for constructing your SnapFenceTM Starter Kit.
IF YOU CAN DREAM IT, YOU CAN BUILD IT.
Banner Sign KitInstructions
1
1) Unpack box and separate parts.
Solid Mount:
2) Mark out the fence line with a string.
Solid Mount:
3) Install base mounts along string at 48” center to center.
Solid Mount:
4) Attach posts (16”) to base mounts with screws.
6) Snap rail sections onto posts (16”). Measure and move rails to desired levels. Secure with screws on both ends.
7) Push on post caps. Attach with PVC glue if desired.
Banner/Sign Attachments: See suggested methods
(3) 16” Posts
(4) 46” Rails (8)
Rail
Connectors
(1)
Bag of
Screws
(3)
Post
Caps
(3)
Base
Mounts
CenterLine CenterLine
String Line
String Line
Solid
48”
Solid
Soil Mount:
3) Install anchor stakes along string at 48” center to center.
OR
CenterLine CenterLine String Line
48”
Soil
Solid
Soil Mount:
4) Attach posts (16”) to anchor stakes with screws.
OR
OR
Soil Mount:
2) Mark out the fence line with a string.
String Line
Soil
5) Attach rail connectors to each end of rails (46”).
Part Number: BSK-16x8
16” x 8’ Banner Sign Kit
Anchor stakes
sold separately.
(3)
Anchor
Stakes
Measure and move
rails to desired levels.
Secure with screws
on both ends.
Secure with screws
on both ends.
Attach with PVC glue if desired.
Affix Banner/Sign
(Front and/or Back)
Affix Banner/Sign
(Front and/or Back)
Suggested methods for
securing your banner/sign to
face of frame:
Use self-tapping screws
through grommet holes.
Use velcro along the back
side of the sign.
Use zip-ties secured through
the grommet holes and then
around the frame.
1
2
3
3
Securing your banner using
pockets:
Slide the Rails into the pockets
before you attach your Elbows
and your Rail Connectors.
The Rails will remain fully
adjustable up and down until
you secure using self-tapping
screws.
Affix Banner/Sign
to face of frame.
1
2
Affix Banner/Sign
using a pocket.
Visit: www.snapfence.com for more
How-To help. Scan the QR code to take
you directly to useful SnapFence tips.
Direct: 888-959-4471