ZALMAN ZM-VE200SE Specification

Brand: ZALMAN

Model: ZM-VE200SE

Category: HDD/SSD enclosures

Type: Specification

This manual is also suitable for

ZM-VE200 SE

ZALMAN ZM-VE200SE is a versatile external enclosure for 2.5” HDD/SSD, allowing for easy access and utilization of storage devices. It features both USB 2.0 and e-SATA interfaces, providing flexible connectivity options. With its compact and lightweight design, the ZM-VE200SE offers portable storage solutions for various applications.

Quick Guide

ZM-VE200SE

www.ZALMAN.com

Ver. 1.2

Please read this Manual before use

.COM

1. Precautions

2. Speciﬁcations

3. System Requirements

■ We are not responsible for any damages due to improper use.

■ Product design and specifications may be revised to improve quality and

performance.

■ Avoid inserting any foreign objects into the device.

■ Keep device away from heat sources, direct sunlight, oil, and humid environment.

■ Do not let the device be wet. It may not be covered by Warranty.

■ It may have problem if

used near magnetic objects.

■ Exterior damage during use is not covered by Warranty.

■ CPU: Intel Pentium / 350 Mhz or above compatible CPU

■ O.S: Windows XP SP3 or above / Mac OS X 10.0 or above

Model

Spec.

ZM-VE200SE

Case Material Aluminum Alloy, Acryl, Poly Carbonate

Weight 98.5g

Dimensions 135.3(L) × 78.6(W) × 13.1(H) ㎜

Interface USB 2.0 / e-SATA

Quick Guide

ZM-VE200 Pouch Screw Driver & Bolts 2pcs

USB 2.0 Cable

4. Components

Quick Guide

.COM

5. Mounting a 2.5” HDD

2.5” HDD

6. Names of Parts

USB Port

Access LED

LCD Display

Jog Switch

e-SATA Port

Firmware Recovery

Write Protect Switch

Serial Number

(1) Appearances

.COM

HDD Mode (Wheel-down the Jog Switch and connect USB cable.)

Dual Mode (Push the Jog Switch and connect USB cable.)

HDD Temp.

‘Folder’ or ‘iso File’ Name

HDD Status

Current Mode‘iso File’ Mount Status

Protection Mode

ODD Mode (Wheel-up the Jog Switch and connect USB cable.)

iso File Mounted to Virtual ODD

Write Protected

Select ‘name’ folder.

HDD Status (Good / Warning / Critical)

Select ‘name.iso’ ﬁle.

Read &

Write Enabled

(2) Display and Modes

7. Connecting to PC

(1) Connect / Disconnect with USB cable

(2) Connect / Disconnect with e-SATA cable

(Optional)

Connect device to PC’s USB port using enclosed USB cable.

When disconnecting, please use “Hardware Safety Removal” on tray.

Connect device to PC’s USB port and e-SATA port using enclosed USB cable

and e-SATA cable.

When removing, right mouse click on ‘My Computer’ → ‘Manage’

→ ‘Device Manager’ → ‘Disk Drive’, then ‘remove’ with right mouse button.

23℃

.COM

8. Introduction

Begin of List

To previous ﬁle

To next ﬁle

Select ﬁle

End of List

Firmware Version

Move to previously selected iso ﬁle

Folder

▶ *.iso

Dual Mode

HDD Model

HDD Mode

HDD S/N

ODD Mode

VE200SE S/N

▶ *.iso

(1) Using Jog Switch

(2) Menu Navigation

To use Virtual ODD, iso ﬁle must be located in the “_iso” folder of device.

Caution

Desired mode is set after waiting 3 seconds

▶ This device supports Hot Swap using e-SATA. To use Hot Swap function, please

check in advance if PC motherboard supports Hot Swap function.

▶ Connect e-SATA cable ﬁrst, then USB cable.(When removing, use reverse order.)

▶ If cable is unplugged with force while operating, it may cause fatal error to the

system and device.

Caution

.COM

MEMO

ZALMAN ZM-VE200SE Specification

Brand: ZALMAN

Model: ZM-VE200SE

Category: HDD/SSD enclosures

Type: Specification

This manual is also suitable for

ZM-VE200 SE

Download PDF

report

ZALMAN ZM-VE200SE Specification

This manual is also suitable for

ZALMAN ZM-VE200SE Specification

Related papers

Other documents