2. ZALMAN
  3. ZM-VE350
ZM-VE350

ZALMAN ZM-VE350, ZM-VE350 2.5 Inch HDD Case User guide

  • Hello, I have reviewed the user guide for the ZALMAN ZM-VE350 HDD Enclosure. This guide covers how to install the HDD, connect it to your PC and use the integrated jog switch for navigation. It also explains the various modes and menu options available with the device. I'm ready to answer any questions you have about this device.
  • What type of HDD is supported?
    How do I connect the device to a PC?
    What is the purpose of the Jog Switch?
    What is Dual Mode?
    What is VCD Mode?
Quick Guide
ZM-VE350
www.ZALMAN.com
Ver. 150518
Please read this Manual before use
1
.COM
1. Precautions
3. System Requirements
■ We are not responsible for any damages due to improper use, except installation
error or normal use.
■
performance.
■ Avoid inserting objects into the device.
■ Keep device away from heat sources, direct sunlight, oil, and humid environment.
■ Do not let the device be wet. It may not be covered by Warranty.
■ It may have problem if used near magnetic objects.
■ Exterior damage during use is not covered by Warranty.
■ Do not turn on / off PC while device is connected to PC. It may cause device
disorder or error.
■ CPU: Intel Pentium / 350 MHz or above compatible CPU
■ OS: Windows 2000/XP/vista/7/8/8.1, Linux 2.6 or later, Mac OS X 10.0 or later
Case Material Aluminum Alloy, Acryl, Poly Carbonate
Weight 96g
Dimensions 135.3(L) x 78.6(W) x 13.1(H)mm
Interface USB 3.0
USB 3.0 CableScrew Driver & Bolts 2pcs
ZM-VE350 Pouch Quick Guide
4. Components
Quick Guide
2
.COM
5. Mounting a 2.5” HDD
2.5” HDD
2.5” HDD
1
3
2
4
6. Names of Parts
Backup Button
Access LED LCD Display
Jog Switch
USB3.0 Port
Serial Number
3
.COM
7. Connecting to PC
Connect device to PC’s USB3.0 port using enclosed USB3.0 cable.
When disconnecting, please use “Hardware Safety Removal” on tray of the O/S.
8. Display and Icon
9. Using Jog Switch
HDD Mode
H
Read & Write Enabled
PC connection status
USB2.0 or USB3.0
List display
D
NAME.ISO
Menu display
D
Mode Selesct
Dual Mode
VCD Mode
Write Protected
D
Stand by Mode
D
STAND BY MODE
D
NAME.ISO
4
.COM
10. Menu Description
■ Enter into menu mode if Jog switch is pressed for 3 seconds.
■If you wants to use the backup software for MS O/S, you can download the
software via Zalman web page(www.zalman.com)
(1) Main Menu
Mode Select > Device Mode setting
Information > Check HDD information and firmware information
Disable Write Protection / Enable Write ProtectionW-Protection >
Exit > Menu Exit
Exit > Menu Exit
(2) Mode Select (“ν”is shown in selected mode)
Dual Mode Both of external HDD and CD-ROM are recognized
VCD Mode ExternalCD-ROM is recognized. (Useful when OS installing)
HDD Mode External HDD is recognized.
(Useful when connecting other devices except PC)
(3) Information
HDD Temp > Hard disk SMART information
HDD Health >
Display HDD health info (Good, Bad)
- If bad is shown is shown, please check HDD carefully after
backup data.
HDD Model Name >------
Firmware Ver. >Display device firmware version
5
/