Page is loading ...
Quick Guide
ZM-HE130
www.ZALMAN.com
Ver. 1.1
Please read this Manual before use
1
WWW.ZALMAN.COM
1. Precautions
2. Specications
3. System Requirements
■ We are not responsible for any damages due to improper use.
■ Product design and specications may be revised to improve quality
and performance.
■ Avoid inserting any foreign objects into the device.
■ Keep device away from any heat sources, direct sunlight, oil, and humid
environment.
■ Do not let the device be wet. It may not be covered by Warranty.
■ It may have problem if used near magnetic objects.
■ Exterior damage during use is not covered by Warranty.
■ CPU: Intel Pentium / 350 Mhz or above compatible CPU
■ O.S: Windows XP SP3 or above / Mac OS X 10.0 or above
Model
Spec.
ZM-HE130
Case Material Aluminum Alloy, Acryl, Poly Carbonate
Weight 96g
Dimensions 135.3(L) × 78.6(W) × 13.1(H) mm
Interface USB 3.0
Quick Guide
ZM-HE130 Pouch Screw Driver & Bolts 2pcs
USB 3.0 Cable Install CD
4. Components
Quick Guide
2
WWW.ZALMAN.COM
5. Mounting a 2.5” HDD
2.5” HDD
2.5” HDD
1
3
2
4
6. Connect to / Disconnect from PC
7. Button description
Connect device to PC’s USB port using enclosed USB cable.
When disconnecting, please use “Hardware Safety Removal” from the system tray.
1. When pressing
“Backup”
button, it runs backup application.
2. When pressing
“Backup”
button more than 3 sec, it runs
“Safety Removal.”
3. If data is not accessed for 10 minutes, it goes into
“Sleep mode”.
4. When device is connected to USB2.0 PC, Red LED is shown.
5. When device is connected to USB3.0 PC, Blue LED is shown.
USB3.0 Port Backup Button
LED Indicator
3
WWW.ZALMAN.COM
8. Installation Program
Insert the bundle CD into CD-ROM drive.
Install program runs automatically
(If auto run does not execute, please execute the
“backup utility.exe”
manually from the CD.)
The window will be displayed as below.
Click
“Next”
to start Installation.
After selecting program destination location, click
“Next”
4
WWW.ZALMAN.COM
After selecting Start Menu folder, click
“Next”
and then click
“Next”
again.
Please check
“Windows Auto run”
, then click
“Next”
and
“Install”
“Backup Utility”
Installation is complete after clicking
“Finish”.
5
WWW.ZALMAN.COM
In this main window,
“Backup”
,
“Setting”
or
“Safe Removal”
is selected.
1. Select folder for backup
2. Click Add / Delete to add/delete folders.
3. Click
“Backup”
button to start.
1. Check ON/OFF to automatically backup with backup button in ZM-HE130
2. Check ON/OFF to start this program automatically whenever Windows OS loads.
/