ZALMAN ZM-VE350 Quick Manual

Type
Quick Manual

ZALMAN ZM-VE350 is a versatile external enclosure for 2.5” HDD/SSD with a USB 3.0 interface. It allows you to connect your HDD/SSD to your PC or laptop for data transfer, backup, or as an additional storage device. With three different modes (Dual Mode, VCD Mode, HDD Mode), you can choose the most suitable mode for your needs. It also features a backup button for easy data backup and an LCD display for status information.

ZALMAN ZM-VE350 is a versatile external enclosure for 2.5” HDD/SSD with a USB 3.0 interface. It allows you to connect your HDD/SSD to your PC or laptop for data transfer, backup, or as an additional storage device. With three different modes (Dual Mode, VCD Mode, HDD Mode), you can choose the most suitable mode for your needs. It also features a backup button for easy data backup and an LCD display for status information.

Quick Guide
ZM-VE350
www.ZALMAN.com
Ver. 150518
Please read this Manual before use
1
.COM
1. Precautions
3. System Requirements
We are not responsible for any damages due to improper use, except installation
error or normal use.
performance.
Avoid inserting objects into the device.
■ Keep device away from heat sources, direct sunlight, oil, and humid environment.
■ Do not let the device be wet. It may not be covered by Warranty.
■ It may have problem if used near magnetic objects.
■ Exterior damage during use is not covered by Warranty.
■ Do not turn on / off PC while device is connected to PC. It may cause device
disorder or error.
■ CPU: Intel Pentium / 350 MHz or above compatible CPU
OS: Windows 2000/XP/vista/7/8/8.1, Linux 2.6 or later, Mac OS X 10.0 or later
Case Material Aluminum Alloy, Acryl, Poly Carbonate
Weight 96g
Dimensions 135.3(L) x 78.6(W) x 13.1(H)mm
Interface USB 3.0
USB 3.0 CableScrew Driver & Bolts 2pcs
ZM-VE350 Pouch Quick Guide
4. Components
Quick Guide
2
.COM
5. Mounting a 2.5” HDD
2.5” HDD
2.5” HDD
1
3
2
4
6. Names of Parts
Backup Button
Access LED
LCD Display
Jog Switch
USB3.0 Port
Serial Number
3
.COM
7. Connecting to PC
Connect device to PC’s USB3.0 port using enclosed USB3.0 cable.
When disconnecting, please use “Hardware Safety Removal” on tray of the O/S.
8. Display and Icon
9. Using Jog Switch
HDD Mode
H
Read & Write Enabled
PC connection status
USB2.0 or USB3.0
List display
D
NAME.ISO
Menu display
D
Mode Selesct
Dual Mode
VCD Mode
Write Protected
D
Stand by Mode
D
STAND BY MODE
D
NAME.ISO
4
.COM
10. Menu Description
Enter into menu mode if Jog switch is pressed for 3 seconds.
If you wants to use the backup software for MS O/S, you can download the
software via Zalman web page(www.zalman.com)
(1) Main Menu
Mode Select > Device Mode setting
Information > Check HDD information and firmware information
Disable Write Protection / Enable Write ProtectionW-Protection >
Exit > Menu Exit
Exit > Menu Exit
(2) Mode Select (“ν”is shown in selected mode)
Dual Mode Both of external HDD and CD-ROM are recognized
VCD Mode ExternalCD-ROM is recognized. (Useful when OS installing)
HDD Mode External HDD is recognized.
(Useful when connecting other devices except PC)
(3) Information
HDD Temp > Hard disk SMART information
HDD Health >
Display HDD health info (Good, Bad)
- If bad is shown is shown, please check HDD
carefully after
backup data.
HDD Model Name
> ------
Firmware Ver. >
Display device firmware version
5
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

ZALMAN ZM-VE350 Quick Manual

Type
Quick Manual

ZALMAN ZM-VE350 is a versatile external enclosure for 2.5” HDD/SSD with a USB 3.0 interface. It allows you to connect your HDD/SSD to your PC or laptop for data transfer, backup, or as an additional storage device. With three different modes (Dual Mode, VCD Mode, HDD Mode), you can choose the most suitable mode for your needs. It also features a backup button for easy data backup and an LCD display for status information.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI