2. Computers & electronics
  3. TVs & monitors
  4. Flat panel accessories
  5. Ergolux
  6. ELDSKRPLLBA
ELDSKRPLLBA

Ergolux ELDSKRPLLBA User guide

  • Hello! I've reviewed the user guide for the ERGOLUX Sit Stand Desk Riser, specifically models ELDSKRPLLBA, ELDSKRPLLWA, and ELDSKRPLWOA. The document provides safety information, assembly instructions, and weight limitations. I understand how important it is to assemble and use correctly. Feel free to ask me any questions you have about the desk riser's features, setup, or usage.
  • What is the maximum weight this desk riser can hold?
    Is this product suitable for outdoor use?
    How often should I check the product for safety?
PRO HEIGHT ADJUSTABLE SIT
STAND DESK RISER
(LARGE)
ELDSKRPLLBA, ELDSKRPLLWA & ELDSKRPLWOA
• Read all instructions before use and retain this user guide for future reference.
• Read all following safety precautions carefully before use.
• Safety gear and proper tools must be used.
• Make sure that the supporting surface will safely support the combined weight of the
equipment and all attached hardware and components.
• Use the mounting screws provided and DO NOT OVER TIGHTEN mounting screws.
• Ensure this product is completely and correctly assembled before use.
• Children should not be allowed play with this product.
• This product contains small items that could be a choking hazard if swallowed. Keep
these items away from children.
• This product is intended for indoor use only. Using this product outdoors could lead to
product failure and personal injury.
• Check that the product is secure and safe to use at regular intervals (at least every
three months).
SAFETY & WARNINGS
WARNING: Exceeding the rated weights may result in instability
causing possible injury.
15kg/33Ibs 2kg/4.4Ibs
Lay all components out on a clean floor and ensure all parts are included. If any pieces are
missing, check all packaging thoroughly, then contact help.Kogan.com for assistance.
A (x1)
B (x1)
C (x1)
D (x4)
E (x2)
F (x3)
G M5 x 10 Screw (x4)
H ST4.2 x 12 Screw (x2)
COMPONENTS
Step 1:
Step 2:
ASSEMBLY
Blanket
Step 3:
Step 4:
D
WARNING: Do not press the release handle while cutting off the
plastic strip lock. Only press the release handle in an upright position.
Step 5:
Step 6:
Step 7:
Step 8a:
Step 8b:
NOTES
Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com
/