2. Kogan
  3. KASLSTRCFDA
KASLSTRCFDA

Kogan KASLSTRCFDA User guide

  • Hello! I've read the user guide for the Kogan KASLSTRCFDA Foldable Racing Simulator Steering Wheel Stand. This document includes instructions for assembly, adjustments such as tilt and height, and folding for storage. It also notes important safety warnings. I'm ready to answer your questions about this device.
  • What should I do if I'm missing parts?
    How often should I check that the product is secure?
    Can I use this product outdoors?
FOLDABLE RACING SIMULATOR
STEERING WHEEL STAND
KASLSTRCFDA
• Closely follow the assembly instructions. Improper installation may result in damage or
serious personal injury.
• Safety gear and proper tools must be used during assembly.
• Be careful of sharp objects during assembly.
• Ensure that the supporting surface will safely support the combined weight of the
equipment and all attached hardware and components.
• Use the mounting screws provided and do not over tighten them.
• This product contains small items that could be a choking hazard if swallowed. Keep
small items away from children.
• This product is intended for indoor use only. Using this product outdoors could lead to
product failure and personal injury.
IMPORTANT: Ensure that you have received all parts according to the component checklist
prior to installation. If any parts are missing or faulty, contact help.Kogan.com for support.
MAINTENANCE: Check that the product is secure and safe to use at regular intervals (at
least every three months).
SAFETY & WARNINGS
WARNING: Use with products heavier than the rated weights indicated
may result in instability causing possible injury.
Lay all components out on a clean floor and ensure all parts are included. If any pieces are
missing, check all packaging thoroughly, then contact help.Kogan.com for assistance.
A
B
C (x4)
D (x2)
E (x2)
F
G
H (x2)
I (x4)
J M4x6 (x4)
K M6x35 (x2)
L M6x12 (x2)
M (x2)
N (x2)
O (x6)
P Spanner
Q 5mm Allen Key
COMPONENTS
Step 1:
ASSEMBLY
Step 2:
WARNING: Ensure the stand is fully unfolded prior to removing the safety pin.
Step 3: Pedal mount tilt adjustment
Step 4: Steering wheel mount tilt adjustment
Step 5:
Step 6:
Step 7: Height adjustment
Step 8: The mounting plate (F) can be reversed to swap between left and right side
mounting.
Step 10: The gear shift mount (G) can be installed in two different positions.
Option 1
Option 2
Step 11:
Step 12: Folding the stand flat
WARNING: Lock the pedal mount in position using the safety pin prior to
folding the stand.
NOTES
Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com
/