Sterling 61040110-96, 62030100-0 Specification

  • Hello! I am an AI chatbot trained to assist you with the Sterling 61040110-96 Specification. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Features
Compression molded from our exclusive solid Vikrell
®
material
Two toiletry shelves and 18 (45.7 cm) towel bar in
back wall for added convenience
Durable swirl-gloss finish
Tongue-and-groove 4-piece modular design allows for
easy snap together installation
10-year consumer/3-year commercial limited warranty
48-1/4 (122.6 cm) x 35-1/4 (89.5 cm) x 73-1/4
(186.1 cm) complete unit rough-in dimensions include
flange
48 (121.9 cm) x 34 (86.4 cm) x 72 (182.9 cm)
complete unit finished dimensions
Codes/Standards Applicable
Specified model meets or exceeds the following:
ASTM E162
ASTM E662
CSA B45.5/IAPMO Z124
HUD, UM Bulletin 73A
NAHB Research Foundation, Inc.
48 (121.9 cm) SEATED SHOWER
BASE AND SURROUND
62030100
Colors/Finishes
0: White
Other: Refer to Price Book for additional colors/finishes
Specified Model
Model Complete Unit Description Colors/Finishes
62030100 48 (121.9 cm) seated shower base and wall surround 0 Other_____
Model Component Description Colors/Finishes
62031100 48 (121.9 cm) seated shower base only 0 Other_____
Model Wall Component Description Colors/Finishes
62034100 Complete wall set 0 Other_____
ADVANTAGETM
Page 1 of 2
1019809-4-
H
For more information
visit SterlingPlumbing.com
or call 1-800-STERLING
Technical Information
Model door maximum
width*
door maximum
height
62030100 44-3/4 (113.7 cm) 67 (170.2 cm)
* NOTE: For shower door installation, use the STERLING
SP fixture specific door only, due to draft angle on
shower surround walls.
Installation Notes
Install this product according to the installation guide.
Size the drain cutout to fit the drain assembly that will be
used.
Double studding is recommended for pivot shower door
installations.
Studs should be positioned roughly as shown.
10" (25.4 cm)
48" (121.9 cm)
34" (86.4 cm)
62030100
24" (61 cm)
5" (12.7 cm)
16"
(40.6 cm)
35-1/4"
(89.5 cm)
22-1/2"
(57.2 cm)
4"
(10.2 cm)
8"
(20.3 cm)
16-1/4"
(41.3 cm)
3-5/16"
(8.4 cm) D.
Drain Hole
4-1/2"
(11.4 cm)
Drain Cutout
48-1/8" (122.2 cm) Min
48-1/4" (122.6 cm) Max
Recommended Support Clip
Locations
24"
(61 cm)
2-7/8"
(7.3 cm)
1-5/8" (4.1 cm)
1-1/4"
(3.2 cm)
73-1/4"
(186.1 cm)
45"
(114.3 cm)
18"
(45.7 cm)
17-1/4"
(43.8 cm)
16-5/8"
(42.2 cm)
Product Diagram
ADVANTAGETM
ADVANTAGETM 48 (121.9 cm) SEATED SHOWER BASE AND SURROUND
Page2of2
1019809-4-
H
/