Sterling Plumbing 62044106 User manual

Type
User manual
Features
Compression molded from Sterling’s exclusive solid
Vikrell
®
material
Modular 3-piece design
Durable swirl gloss finish
Two toiletry shelves and 18 (45.7 cm) towel bar in
back wall for added convenience
10 year consumer/3 year commercial limited warranty
Wall surround allows for attachment of grab bars
60 (152.4 cm) x 34 (86.4 cm) receptor available
separately (model 62041100)
60 (152.4 cm) x 35-1/4 (89.5 cm) x 60-1/2
(153.7 cm) complete wall surround rough-in
dimensions include flange
60 (152.4 cm) x 34 (86.4 cm) x 59-1/4 (150.5 cm)
complete wall surround finished dimensions
Codes/Standards Applicable
Specified model meets or exceeds the following:
ANSI Z124.1.2
IAPMO/UPC
ASTM E84
HUD, UM Bulletin 73A
NAHB Research Foundation, Inc.
60 (152.4 cm) WALL SURROUND
WITH BACKER BOARD LOCATIONS
62044106
Colors/Finishes
0: White
Other: Refer to Price Book for additional colors/finishes
Specified Model
Model Wall Component Description Colors/Finishes
62044106 Complete wall set with backer board locations 0 Other_____
Model Complete Unit Description Colors/Finishes
62040106 Seated shower receptor and complete wall set with backer board locations,
center drain
0 Other_____
ADVANTAGETM
SterlingPlumbing.com
Visit us online for fixture color choices, detailed product information, color photos, installation instructions, care
guides, and warranties. Sterling offers additional lines of plumbing products to complement the Sterling product
you’ve chosen. Sign up for the Sterling monthly e-newsletter which showcases our latest product innovations. You
may also call our Sterling Plumbing Answer Center from within the USA at 1-888-STERLING in addition to
consulting with your local dealer. Sterling. Strong. Professional. Design.
Page 1 of 2
1063826-4-
A
Technical Information
Model Door maximum
width
Door maximum
height
62044106 56-1/2
(143.5 cm)
67
(170.2 cm)
Installation Notes
Install this product according to the installation guide.
End stud positioning is critical if nailing-in flanges are to be
used.
Studs should be positioned roughly as shown for support clip
or roofing nail installation.
Attach grab bars at the specified backer board locations only.
34" (86.4 cm)
8" (20.3 cm)
Recommended Roofing Nail
Locations (5 total)
4-1/2"
(11.4 cm) D.
Drain Cutout
3-5/16"
(8.4 cm) D.
Drain Hole
45" (114.3 cm)
21"
(53.3 cm)
2-1/2" (6.4 cm)
3-1/2"
(8.9 cm)
3-1/2"
(8.9 cm)
2"
(5.1 cm)
1"
(2.5 cm)
1"
(2.5 cm)
1"
(2.5 cm)
10"
(25.4 cm)
10"
(25.4 cm)
1" (2.5 cm)
2-7/8"
(7.3 cm)
1-1/4"
(3.2 cm)
1-5/8" (4.1 cm)
59-1/4"
(196.2 cm)
60" (152.4 cm) Min
60-1/8" (152.7 cm) Max
35-1/4"
(89.5 cm)
25-1/2" (64.8 cm)
4" (10.2 cm)
7-1/2" (19.1 cm)
16" (40.6 cm)
14" (35.6 cm)
16"
(40.6 cm)
30" (76.2 cm)
16-1/4"
(41.3 cm)
60"
(152.4 cm)
42"
(106.7 cm)
Grab Bar
24"
(61 cm)
Grab Bar
Back Wall
End Wall
Backer board locations
Note: Right and left end walls are
the same, only mirrored.
42"
(106.7 cm)
Grab Bar
Dimensions are taken from
the center of the grout lines.
Product Diagram
ADVANTAGETM
ADVANTAGETM 60 (152.4 cm) WALL SURROUND WITH BACKER BOARD LOCATIONS
Page2of2
1063826-4-
A
  • Page 1 1
  • Page 2 2

Sterling Plumbing 62044106 User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI