Features
•
Compression molded from our exclusive solid Vikrell
®
material
•
Tongue-and-groove 4-piece modular design allows for
easy ″snap together″ installation
•
Durable high-gloss finish
•
10-year consumer/3-year commercial limited warranty
•
Convenient shelves provide generous storage
•
Shaving ledge and foot rest added for comfort
•
Wall surround allows for attachment of grab bars
•
Tile design
•
48″ (121.9 cm) x 35-1/4″ (89.5 cm) x 77″ (195.6 cm)
complete unit rough-in dimensions include flange
•
48″ (121.9 cm) x 34″ (86.4 cm) x 75-3/4″ (192.4 cm)
complete unit finished dimensions
Codes/Standards Applicable
Specified model meets or exceeds the following:
•
ASTM E162
•
ASTM E662
•
CSA B45.5/IAPMO Z124
48″ (121.9 cm) SHOWER BASE AND
SURROUND WITH BACKER BOARDS
72120106
Colors/Finishes
•
0: White
•
Other: Refer to Price Book for additional colors/finishes
Specified Model
Model Complete Unit Description Colors/Finishes
72120106 48″ (121.9 cm) shower base and wall surround with backer boards, center drain ❑ 0 ❑ Other_____
Model Wall Component Description Colors/Finishes
72122106 Back wall with backer boards ❑ 0 ❑ Other_____
72105106 End walls with backer boards ❑ 0 ❑ Other_____
ENSEMBLETM
Page 1 of 2
1065812-4-
C
For more information
visit SterlingPlumbing.com
or call 1-800-STERLING
Technical Information
Model Door maximum
width
Door maximum
height
72120106 44-5/8″ (113.3 cm) 70-1/2″ (179.1 cm)
Installation Notes
Install this product according to the installation guide.
Size the drain cutout to fit the drain assembly that will be
used.
Double studding is recommended for pivot shower door
installations.
Studs should be positioned roughly as shown.
Attach grab bars at the specified backer board locations only.
Note: Right and left end walls are the same, only mirrored.
1"
(2.5 cm)
1"
(2.5 cm)
10"
(25.4 cm)
3-1/2" (8.9 cm)
10" (25.4 cm)
2" (5.1 cm)
2" (5.1 cm)
2"
(5.1 cm)
2" (5.1 cm)
Front Wall
End Wall
10" (25.4 cm)
4" (10.2 cm)
72-1/2"
(184.2 cm)
5-1/2"
(14 cm)
77"
(195.6 cm)
4-1/2"
(11.4 cm)
4-1/2" (11.4 cm) D.
Drain Cutout
15-13/16"
(40.2 cm)
3-5/16"
(8.4 cm)
Max OD
Drain Hole
48-1/8" (122.2 cm) Min
48-1/4" (122.6 cm) Max
24"
(61 cm)
8"
(20.3 cm)
26"
(66 cm)
35-1/4"
(89.5 cm)
18" (45.7 cm)
or 24" (61 cm)
Grab Bar
1-5/8" (4.1 cm)
at Midpoint
35-1/4"
(89.5 cm)
1-1/4"
(3.2 cm)
48"
(121.9 cm)
12"
(30.5 cm)
Grab Bar
Backer board locations
18" (45.7 cm) Grab Bar
16" (40.6 cm)
Product Diagram
ENSEMBLETM
ENSEMBLETM 48″ (121.9 cm) SHOWER BASE AND SURROUND WITH BACKER BOARDS
Page2of2
1065812-4-
C
-
1
-
2
Sterling Shower System with Backer Boards 72120106 Specification Sheet
- Type
- Specification Sheet
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Sterling 72220106-96 Dimensions Guide
-
-
-
-
-
-
-
-
-
Other documents
-
Sterling Plumbing Shower System with Backer Boards 72120106 User manual
-
-
-
-
-
-
-
-
-