Features
•
Compression molded from our exclusive solid Vikrell
®
material
•
Tongue-and-groove 4-piece modular design allows for
easy ″snap together″ installation
•
Durable high-gloss finish
•
Convenient shelves provide generous storage
•
Shaving ledge and foot rest added for comfort
•
Wall surround allows for attachment of grab bars
•
48″ (121.9 cm) x 35-1/4″ (89.5 cm) x 77″ (195.6 cm)
complete unit rough-in dimensions include flange
•
48″ (121.9 cm) x 34″ (86.4 cm) x 75-3/4″ (192.4 cm)
complete unit finished dimensions
Codes/Standards Applicable
Specified model meets or exceeds the following:
•
ASTM E162
•
ASTM E662
•
CSA B45.5/IAPMO Z124
48″ (121.9 cm) SHOWER BASE AND
SURROUND WITH BACKER BOARDS
72220106
Colors/Finishes
•
0: White
•
Other: Refer to Price Book for additional colors/finishes
Specified Model
Model Complete Unit Description Colors/Finishes
72220106 48″ (121.9 cm) shower base and wall surround with backer boards ❑ 0 ❑ Other_____
Model Wall Component Description Colors/Finishes
72222106 Back wall with backer boards ❑ 0 ❑ Other_____
72205106 End wall set with backer boards ❑ 0 ❑ Other_____
ENSEMBLETM
Page 1 of 2
1064360-4-
C
For more information
visit SterlingPlumbing.com
or call 1-800-STERLING
Technical Information
Model Door maximum
width
Door maximum
height
72220106 44-5/8″ (113.3 cm) 70-1/2″ (179.1 cm)
Installation Notes
Install this product according to the installation guide.
Size the drain cutout to fit the drain assembly that will be
used.
Double studding is recommended for pivot shower door
installations.
Studs should be positioned roughly as shown.
Attach grab bars at the specified backer board locations only.
10" (25.4 cm)
4" (10.2 cm)
Note: Right and left end walls are the same, only mirrored.
18" (45.7 cm) Grab Bar
48" (121.9 cm) Grab Bar
48"
(121.9 cm)
72-1/2"
(184.2 cm)
1-1/4"
(3.2 cm)
35-1/4"
(89.5 cm)
1-5/8" (4.1 cm)
at Midpoint
35-1/4"
(89.5 cm)
26"
(66 cm)
8"
(20.3 cm)
16" (40.6 cm)
24" (61 cm)
15-13/16"
(40.2 cm)
4-1/2"
(11.4 cm) D.
Drain Cutout
3-5/16"
(8.4 cm) OD
Drain Hole
48-1/8" (122.2 cm) Min
48-1/4" (122.6 cm) Max
3" (7.6 cm)
36"
(91.4 cm)
Grab Bar
5-1/2"
(14 cm)
4-1/2"
(11.4 cm)
77"
(195.6 cm)
22" (55.9 cm)
22" (55.9 cm)
14"
(35.6 cm)
3-1/2"
(55.9 cm)
1"
(2.5 cm)
3"
(7.6 cm)
1" (2.5 cm)
46"
(116.8 cm)
1" (2.5 cm)
Back Wall
End Wall
Backer board locations
Product Diagram
ENSEMBLETM
ENSEMBLETM 48″ (121.9 cm) SHOWER BASE AND SURROUND WITH BACKER BOARDS
Page2of2
1064360-4-
C
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Sterling Shower System with Backer Boards 72120106 Specification Sheet
-
Sterling 72220100-0 Specification
-
-
-
-
-
-
-
-
Other documents
-
Sterling Plumbing Shower Receptor and Wall Surround with Backer Boards 72220106 User manual
-
-
-
-
-
-
-
-
-