Sterling 72220100-0 Specification

Type
Specification

This manual is also suitable for

Features
Compression molded from our exclusive solid Vikrell
®
material
Tongue-and-groove 4-piece modular design allows for
easy snap together installation
Convenient shelves provide generous storage
Shaving ledge and foot rest added for comfort
Shower base can be ordered separately
Durable high-gloss finish
10-year consumer/3-year commercial limited warranty
48-1/4 (122.6 cm) x 35-1/4 (89.5 cm) x 77
(195.6 cm) complete unit rough-in dimensions include
flange
48 (121.9 cm) x 34 (86.4 cm) x 75-3/4 (192.4 cm)
complete unit finished dimensions
Codes/Standards Applicable
Specified model meets or exceeds the following:
ASTM E162
ASTM E662
CSA B45.5/IAPMO Z124
48 (121.9 cm) SHOWER BASE AND
WALL SURROUND
72120100
ALSO 72220100
7222010072120100
Colors/Finishes
0: White
Other: Refer to Price Book for additional colors/finishes
Specified Model
Model Complete Unit Description Colors/Finishes
72120100 48 (121.9 cm) shower base and wall surround, tile wall 0 Other_____
72220100 48 (121.9 cm) shower base and wall surround, curve wall 0 Other_____
Model Age-in-Place Component Description Colors/Finishes
72220106 Complete unit with Age-in-Place backers, curve wall 0 Other_____
72222106 Back wall with backers, curve wall 0 Other_____
72205106 End wall set with backers, curve wall 0 Other_____
72120106 Complete unit with Age-in-Place backers, tile wall 0 Other_____
72122106 Back wall with backers, tile wall 0 Other_____
72105106 End wall set with backers, tile wall 0 Other_____
ENSEMBLETM
Page 1 of 2
1017264-4-
H
For more information
visit SterlingPlumbing.com
or call 1-800-STERLING
Technical Information
Model Door maximum width Door maximum
height
72120100
72220100
44-5/8 (113.3 cm) 70-1/2 (179.1 cm)
Installation Notes
Install this product according to the installation guide.
Size the drain cutout to fit the drain assembly that will be
used.
Double studding is recommended for pivot shower door
installations.
Studs should be positioned roughly as shown.
Both tile and curve wall surrounds share the same
dimensions.
10" (25.4 cm)
4" (10.2 cm)
24"
(61 cm)
48-1/8" (122.2 cm) Min
48-1/4" (122.6 cm) Max
3-5/16"
(8.4 cm)D.
Drain Hole
8"
(20.3 cm)
26"
(66 cm)
35-1/4"
(89.5 cm)
1-5/8" (4.1 cm)
at Midpoint
35-1/4"
(89.5 cm)
1-1/4"
(3.2 cm)
72-1/2"
(184.2 cm)
48"
(121.9 cm)
4-1/2"
(11.4 cm)
5-1/2"
(14 cm)
77"
(195.6 cm)
15-13/16"
(40.2 cm)
4-1/2"
(11.4 cm) D.
Drain Cutout
16" (40.6 cm)
Product Diagram
ENSEMBLETM
ENSEMBLETM 48 (121.9 cm) SHOWER BASE AND WALL SURROUND
Page2of2
1017264-4-
H
  • Page 1 1
  • Page 2 2

Sterling 72220100-0 Specification

Type
Specification
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI