Features
•
Compression molded from our exclusive solid Vikrell
®
material
•
Tongue-and-groove 4-piece modular design allows for
easy ″snap together″ installation
•
Durable swirl-gloss finish
•
10-year consumer/3-year commercial limited warranty
•
32-1/4″ (81.9 cm) x 35-1/4″ (89.5 cm) x 73-1/4″
(186.1 cm) complete unit rough-in dimensions include
flange
•
32″ (81.3 cm) x 34″ (86.4 cm) x 72″ (182.9 cm)
complete unit finished dimensions
Codes/Standards Applicable
Specified model meets or exceeds the following:
•
ASTM E162
•
ASTM E662
•
ANSI Z124.1.2
•
HUD, UM Bulletin 73A
•
NAHB Research Foundation, Inc.
32″ (81.3 cm) SHOWER RECEPTOR
AND WALL SURROUND
62010100
Colors/Finishes
•
0: White
•
Other: Refer to Price Book for additional colors/finishes
Specified Model
Model Complete Unit Description Colors/Finishes
62010100 32″ (81.3 cm) shower receptor and wall surround ❑ 0 ❑ Other_____
Model Wall Component Description Colors/Finishes
62012100 Back wall ❑ 0 ❑ Other_____
62013110 Left end wall ❑ 0 ❑ Other_____
62013120 Right end wall ❑ 0 ❑ Other_____
62015100 End wall set ❑ 0 ❑ Other_____
ADVANTAGETM
Page 1 of 2
1020187-4-
G
For more information
visit SterlingPlumbing.com
or call 1-800-STERLING
Technical Information
Model Door maximum width Door maximum
height
62010100 29-3/4″ (75.6 cm) 67″ (170.2 cm)
Installation Notes
Install this product according to the installation guide.
Size the drain cutout to fit the drain assembly that will be
used.
Double studding is recommended for pivot shower door
installations.
Studs should be positioned roughly as shown.
62010100
34" (86.4 cm)
32" (81.3 cm)
5" (12.7 cm)
10"
(25.4 cm)
22-1/2"
(57.2 cm)
35-1/4"
(89.5 cm)
45"
(114.3 cm)
16-1/2"
(41.9 cm)
16"
(40.6 cm)
7" (17.8 cm)
6-1/4"
(15.9 cm)
73-1/4"
(186.1 cm)
8"
(20.3 cm)
4"
(10.2 cm)
16-1/4"
(41.3 cm)
16"
(40.6 cm)
16"
(40.6 cm)
4-1/2"
(11.4 cm) D.
Drain Cutout
32-1/8" (81.6 cm) Min
32-1/4" (81.9 cm) Max
3-5/16"
(8.4 cm) D.
Drain Hole
1-5/8"
(4.1 cm)
1-1/4"
(3.2 cm)
2-7/8"
(7.3 cm)
Product Diagram
ADVANTAGETM
ADVANTAGETM 32″ (81.3 cm) SHOWER RECEPTOR AND WALL SURROUND
Page2of2
1020187-4-
G
Features
•
CleanCoat
TM glass coating
•
Frameless design maximizes glass area
•
Inside and outside elegant pull handles
•
Two roller-compression latches allow for smooth,
secure door closure
•
A concealed hinge provides smooth, stable operation
•
No top header eliminates clearance issues
•
1-1/2″ (3.8 cm) width adjustability for out-of-plumb
conditions
•
Aluminum components extruded from alloy 6063-T5
•
Stainless steel hardware prevents rusting or corrosion
•
1/4″ (6 mm) thick tempered glass
•
Available in sizes to fit 28-3/4″ (73 cm) to 32-3/4″
(83.2 cm) opening
Codes/Standards Applicable
Specified model meets or exceeds the following:
•
ANSI Z97.1 (tempered glass)
•
16 CFR Part 1201
FRAMELESS HINGE SHOWER DOOR
6300 Series
Colors/Finishes
•
Refer to the Price Book for current frame finish and glass
options
Specified Model
Model A Width (Max/Min)* B (Height)* C Walk Through Max)*
6305-30** 30-1/4″ (76.8 cm) / 28-3/4″ (73 cm) 65-1/2″ (166.4 cm) 23-13/16″ (60.5 cm)
6305-31** 31-1/2″ (80 cm) / 30″ (76.2 cm) 65-1/2″ (166.4 cm) 25-1/16″ (63.7 cm)
6305-32** 32-3/4″ (83.2 cm) / 31-1/4″ (79.4 cm) 65-1/2″ (166.4 cm) 26-5/16″ (66.8 cm)
6305-34** 34″ (86.4 cm) / 32-1/2″ (82.6 cm) 65-1/2″ (166.4 cm) 27-9/16″ (70 cm)
6305-35** 35-1/4″ (89.5 cm) / 33-3/4″ (85.7 cm) 65-1/2″ (166.4 cm) 28-13/16″ (73.2 cm)
6305-36** 36-1/2″ (92.7 cm) / 35″ (88.9 cm) 65-1/2″ (166.4 cm) 30-1/16″ (76.4 cm)
6305-37** 37-3/4″ (95.9 cm) / 36-1/4″ (92.1 cm) 65-1/2″ (166.4 cm) 31-5/16″ (79.5 cm)
6305-39** 39″ (99.1 cm) / 37-1/2″ (95.3 cm) 65-1/2″ (166.4 cm) 32-9/16″ (82.7 cm)
* Note: Consult the diagram on the next page for the location of the measurements.
** Note: Add appropriate frame color/finish code to the end of the unit model # when ordering.
FINESSETM
Page 1 of 2
1019156-4-
J
For more information
visit SterlingPlumbing.com
or call 1-800-STERLING
A
B
C
3-7/8"
(9.8 cm)
1-3/8"
(3.5 cm)
1-1/2"
(3.8 cm)
Product Diagram
FINESSETM
FINESSETM FRAMELESS HINGE SHOWER DOOR
Page2of2
1019156-4-
J
/