Sterling Plumbing Shower Receptor and Wall Surround with Backer Boards 72220106 User manual

Type
User manual

This manual is also suitable for

Features
Compression molded from Sterling’s exclusive solid
Vikrell
®
material
Modular 4-piece design
Lightly pebbled bottom surface for sure footing
Tongue-and-groove snap together design
Durable high gloss finish
Convenient shelves provide generous storage
Shaving ledge and foot rest added for comfort
Wall surround allows for attachment of grab bars
48 (121.9 cm) x 35-1/4 (89.5 cm) x 77 (195.6 cm)
complete unit rough-in dimensions include flange
48 (121.9 cm) x 34 (86.4 cm) x 75-3/4 (192.4 cm)
complete unit finished dimensions
Codes/Standards Applicable
Specified model meets or exceeds the following:
ANSI Z124.1.2
IAPMO/UPC
CSA B45
ASTM F469
48 (121.9 cm) SHOWER RECEPTOR
AND WALL SURROUND WITH
BACKER BOARDS
72220106
Colors/Finishes
0: White
Other: Refer to Price Book for additional colors/finishes
Specified Model
Model Complete Unit Description Colors/Finishes
72220106 48 (121.9 cm) shower receptor and wall surround with backer boards 0 Other_____
Model Wall Component Description Colors/Finishes
72222106 Back wall with backer boards 0 Other_____
72205100 End wall set with backer boards 0 Other_____
ENSEMBLETM
SterlingPlumbing.com
Visit us online for fixture color choices, detailed product information, color photos, installation instructions, care
guides, and warranties. Sterling offers additional lines of plumbing products to complement the Sterling product
you’ve chosen. Sign up for the Sterling monthly e-newsletter which showcases our latest product innovations. You
may also call our Sterling Plumbing Answer Center from within the USA at 1-888-STERLING in addition to
consulting with your local dealer. Sterling. Strong. Professional. Design.
Page 1 of 2
1064360-4-
A
Technical Information
Model Door maximum
width
Door maximum
height
72220106 44-5/8 (113.3 cm) 70-1/2 (179.1 cm)
Installation Notes
Install this product according to the installation guide.
Size the drain cutout to fit the drain assembly that will be
used.
End stud positioning is critical if nailing-in flanges are to be
used.
Double studding is recommended for pivot shower door
installations.
Studs should be positioned roughly as shown for roofing nail
installation.
Attach grab bars at the specified backer board locations only.
Backer board locations
1-5/8" (4.1 cm)
at Midpoint
35-1/4"
(89.5 cm)
72-1/2"
(184.2 cm)
77"
(195.6 cm)
1-1/4"
(3.2 cm)
5-1/2"
(14 cm)
4-1/2"
(11.4 cm)
35-1/4"
(89.5 cm)
10" (25.4 cm)
4" (10.2 cm)
8"
(20.3 cm)
26"
(66 cm)
16" (40.6 cm)
21"
(53.3 cm)
15-13/16"
(40.2 cm)
3-5/16"
(8.4 cm) OD
Drain Hole
4-1/2"
(11.4 cm)
D. Drain
Cutout
Recommended Roofing
Nail Locations (4 total)
3" (7.6 cm)
14"
(35.6 cm)
1"
(2.5 cm)
46"
(116.8 cm)
3-1/2"
(55.9 cm)
22" (55.9 cm)
22" (55.9 cm)
1" (2.5 cm)
1" (2.5 cm)
3"
(7.6 cm)
Back Wall
End Wall
48"
(121.9 cm)
48" (121.9 cm) Min
48-1/8" (122.2 cm) Max
Note: Right and left end walls are the same, only mirrored.
36"
(91.4 cm)
Grab Bar
18" (45.7 cm) Grab Bar
48" (121.9 cm) Grab Bar
Product Diagram
ENSEMBLETM
ENSEMBLETM 48 (121.9 cm) SHOWER RECEPTOR AND WALL SURROUND WITH BACKER BOARDS
Page2of2
1064360-4-
A
  • Page 1 1
  • Page 2 2

Sterling Plumbing Shower Receptor and Wall Surround with Backer Boards 72220106 User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI