Features
•
Compression molded from Sterling’s exclusive solid
Vikrell
®
material
•
Modular 4-piece design
•
Caulkless installation
•
Pivot ″snap together″ installation
•
Convenient shelves provide generous storage
•
Durable high gloss finish
•
Lightly pebbled bottom surface for sure footing
•
10-year consumer/3-year commercial limited warranty
•
Wall surround allows for attachment of grab bars
•
48-1/8″ (122.2 cm) x 37-1/4″ (94.6 cm) x 77″ (195.6
cm) rough-in dimensions include nailing flange
•
48″ (121.9 cm) x 36″ (91.4 cm) x 71-1/4″ (181 cm)
complete unit finished dimensions
Codes/Standards Applicable
Specified model meets or exceeds the following:
•
ANSI Z124.1.2
•
IAPMO/UPC
•
CSA B45
48″ (121.9 cm) RECEPTOR AND
SURROUND W/BACKER BOARDS
72260106
Colors/Finishes
•
0: White
•
Other: Refer to Price Book for additional colors/finishes
Specified Model
Model Complete Unit Description Colors/Finishes
72260106 48″ (121.9 cm) shower receptor and wall surround with backer boards ❑ 0 ❑ Other_____
Model Wall Component Description Colors/Finishes
72262106 48″ (121.9 cm) Backwall ❑ 0 ❑ Other_____
72261100 48″ (121.9 cm) Receptor ❑ 0 ❑ Other_____
72245106 Endwall set with backer boards ❑ 0 ❑ Other_____
ACCORD
®
Page 1 of 2
1092043-4-
A
For more information
visit SterlingPlumbing.com
or call 1-800-STERLING
Technical Information
Model door maximum width door maximum
height
72260106 44-5/8″ (113.3 cm) 72″ (182.9 cm)
Installation Notes
Install this product according to the installation guide.
Size the drain cutout to fit the drain assembly that will be
used.
End stud positioning is critical if nailing-in flanges are to be
used.
Double studding is recommended for pivot shower door
installations.
Studs should be positioned roughly as shown for roofing nail
use.
Receptor cannot be installed without the wall surround.
10" (25.4 cm)
4" (10.2 cm)
36"
(91.4 cm)
1-5/8" (4.1 cm)
at Midpoint
6-5/8"
(16.8 cm)
7-5/8"
(19.4 cm)
8-3/4"
(22.2 cm)
11-5/8"
(29.5 cm)
11-5/8"
(29.5 cm)
17-5/8"
(44.8 cm)
17-5/8"
(44.8 cm)
12-1/4"
(31.1 cm)
19"
(48.3 cm)
12-1/4"
(31.1 cm)
71-1/4"
(181 cm)
77"
(195.6 cm)
1-1/4"
(3.2 cm)
1-1/4"
(3.2 cm)
16"
(40.6 cm)
8"
(20.3 cm)
37-1/4"
(94.6 cm)
15-13/16"
(40.2 cm)
4-1/2"
(11.4 cm) D.
Drain Cutout
3-5/16"
(8.4 cm) OD
Drain Hole
26"
(66 cm)
Recommended Roofing
Nail Locations (4 total)
End Wall
Back Wall
48"
(121.9 cm)
16"
(40.6 cm)
16"
(40.6 cm)
54"
(137.2 cm)
3-7/8"
(9.8 cm)
35-1/4"
(89.5 cm)
29-1/4"
(74.3 cm)
10-1/4" (26 cm)
48-1/8" (122.2 cm) Min
48-1/4" (122.6 cm) Max
24"
(61 cm)
Product Diagram
ACCORD
®
ACCORD
®
48″ (121.9 cm) RECEPTOR AND SURROUND W/BACKER BOARDS
Page2of2
1092043-4-
A
/