2. Haworth
  3. 7029-9677

Haworth 7029-9677 Operating instructions

  • Hello! I've reviewed the Installation Instructions for the ERGONOMIC TOOLS Adjustable Keyboard Pad. This document outlines the process for assembling and installing the keyboard pad, including track mounting, attaching the tray, and installing the track guard, using different track length options. I'm ready to answer any questions you might have about this product's setup and use.
  • What tools are required for installation?
    How far from the edge of the worksurface should the track be positioned?
    What is the purpose of the track guard?
CUSTOMER SERVICE PHONE: 1-800-426-8562
Tools Required
#2 1/8"
Part No: Rev:
Page:
E.C.O. No: 251-212 1 OF 3 7029-9677 1
OPTIONAL ARMS
23" Track
17" OR 21" Track
D
EArm
Tray
S133 S135
S137
S136
G
Track Guard
A
Track
S134
Adjustable Keyboard Pad
Installation Instructions
ERGONOMIC TOOLS®
#10-24 x 1" Flat Head Screw
(S133)
#12 x 3/4" Pan Head Screw
(S134)
#10-24 x 1/2" Screw
(S135)
#10 Acorn Nut - Low
(S136)
Tooth Lock Washer
(S137)
CUSTOMER SERVICE PHONE: 1-800-426-8562
Part No: Rev:
Page:
E.C.O. No: 251-212 2 OF 3 7029-9677 1
S137
S136
A
H
E
Slide glides (H) into grove of track (A)
Install track (A)
13mm (1/2")
S134
5/8"
1/8"
A
21 & 23" Track 17" Track
TILT
OR
OR
S133
12
1
NOTE: If necessary tilt
keyboard pad (E) to lower.
Note: If worksurface is not pre-drilled,
position track (A) 1/2” in from front edge
of worksurface. Use holes in track (A) as
template and drill 5/8” deep holes.
2
1
2
E
#10-24 x 1" Flat Head Screw
(S133)
#12 x 3/4" Pan Head Screw
(S134)
#10 Acorn Nut - Low
(S136)
Tooth Lock Washer
(S137)
CUSTOMER SERVICE PHONE: 1-800-426-8562
Part No: Rev:
Page:
E.C.O. No: 251-212 3 OF 3 7029-9677 1
Swivel keyboard pad (E) to one side
Install track guard (G)
E
A
S135
4
5
Install mouse pad (H)
3
G
H
H
J1
E
S133
J2
#10-24 x 1" Flat Head Screw
(S133)
#10-24 x 1/2" Screw
(S135)
/