2. Troy-Bilt
  3. 12A466N211

Troy-Bilt 12A466N211, 12A-466M011, 12A466M011 Fast Start Guide

  • Hello! I am an AI chatbot trained to assist you with the Troy-Bilt 12A466N211 Fast Start Guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Read and understand all instruction, warning, and danger labels.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND
FOLLOW THE SAFE OPERATION PRACTICES BEFORE OPERATING .
Lea el manual de operación anexo sobre ensamblaje e inicio.
Need Help? Call 1-888-TO-HELP-U (1-888-864-3578)
Use cable
tie to secure
cables to
lower handle.
1
2
3
4
Refer to Operator’s Manual for instructions on attaching the grass catcher.
778-1166012A-466 © 2008
Blade Control Handle
(A) Lift handle
to extended
position.
(B) Tighten
star knobs.
Recoil
Starter
Star Knobs
Place ends of
lower handle
onto handle
brackets. Insert
carriage bolts
and tighten
with wing nuts.
A
B
A
C
B
D
(A) Hold blade
control handle
against upper
handle.
(B)(C) Slowly
pull starter
rope from
engine and slip
starter rope
into rope guide.
(D) Tighten
rope guide
wing knob.
Read and understand all instruction, warning, and danger labels.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND
FOLLOW THE SAFE OPERATION PRACTICES BEFORE OPERATING .
Lea el manual de operación anexo sobre ensamblaje e inicio.
Need Help?
Call 1-888-TO-HELP-U
Lea el manual de operación anexo sobre ensamblaje e inicio.
Fill tank with gas up to within 1/2-inch
of top of tank. Do not overll.
Fill engine with entire contents of oil bottle
supplied. Do not overll.
5
6
Need Help?
Call 1-888-TO-HELP-U
Gas Cap
Oil Fill
Depress blade control handle and hold.
8
7
Pull starter rope with quick, full arm stroke.
If engine does not start after ten seconds of
repeated pulls, wait a few minutes and repeat
steps 7 through 8.
/