Focal Point Skydome LED 2', 3', 4' - Recessed FSDL-22/33/44 Installation guide

Brand: Focal Point

Model: Skydome LED 2', 3', 4' - Recessed FSDL-22/33/44

Type: Installation guide

IS0511 REV. C 2022 ©Focal Point, LLC 4201 S. Pulaski Rd., Chicago, IL 60632 | www.focalpointlights.com 1 of 3

skydome™ led

FSDL 22 | 33 | 44

focal point included hardware key

power off

power on

Luminaires must be installed by a qualiﬁed electrician (check with local and national codes for proper installation).

To prevent electrical shock, disconnect electrical supply before installation or servicing.

attention

luMinaire MuSt Be inStalled prior to ceilinG

skydome 2x2

skydome 3x3

skydome 4x4

provided By otherS

4 - 1/4-20 hanGer rodS

4 - c-channelS (drywall only)

8 - levellinG Support BracketS

12.00”

23.50”

8.625”

24.00”

22.50” cut-out

1.1875” Min 1.50” Max

24”

23.50”

22.50”

ceilinG cutout

diaMeter

36"

35.50"

35.50"34.50"

ceilinG cutout

diaMeter

48"

47.50"

46.50"

ceilinG cutout

diaMeter

2” Min 2.1875” Max

24.00"

35.50"

36.00"

34.5" cut-out

8.625"

4 - 1/4 20 hanGer rodS (By otherS)

8.625"

36.00"

47.50"

48.00"

46.5" cut-out

unit weiGht: 24 lBS.

unit weiGht: 44 lBS.

unit weiGht: 58 lBS.

1.1875" Min 1.50" Max

2" Min 2.1875" Max

2" Min

2.1875" Max

1.1875" Min

1.50" Max

IS0511 REV. C 2022 ©Focal Point, LLC 4201 S. Pulaski Rd., Chicago, IL 60632 | www.focalpointlights.com 2 of 3

Luminaires must be installed by a qualiﬁed electrician (check with local and national codes for proper installation).

To prevent electrical shock, disconnect electrical supply before installation or servicing.

GRID

Make electrical connectionS

AVOID ALL CONTACT WITH LED SURFACE,

LEDs ARE EASILY DAMAGED!

ceilinG cutout diaMeter - Grid & drywall

skydome 2x2 – 22.10" Min 22.50" Max

skydome 3x3 – 34.10" Min 34.50" Max

skydome 4x4 – 46.10" Min 46.50" Max

SECURE TO STRUCTURE ABOVE

(hanGer rodS By otherS)

REST CEILING TILE ON OUTER RING

4x8 LEVEL LUMINAIRE WITH

INCLUDED BRACKETS

3x8

Contractor is responsible for adequately reinforcing walls and/or ceilings to support luminaire weight. Focal Point, LLC accepts no responsibility for inadequately reinforced walls

and/or ceilings. The information contained in this drawing is the sole property of Focal Point, LLC. Any reproduction in part or whole without the written permission of Focal Point, LLC

is prohibited.

1 2

AVOID ALL CONTACT WITH LED SURFACE,

LEDs ARE EASILY DAMAGED!

Make electrical connectionS

USE OUTER RING AS PLASTER FRAME

DRYWALL

AVOID ALL CONTACT WITH LED SURFACE,

LEDs ARE EASILY DAMAGED!

23x4 SECURE TO STRUCTURE ABOVE

(hanGer rodS By otherS)

7x8 LEVEL LUMINAIRE WITH