Midmark Integra™ Sterilization Cabinetry - Steri-Center Installation guide

Integra™ Sterilization Cabinetry - Steri-Center
Midmark
Brand
Midmark
Model
Integra™ Sterilization Cabinetry - Steri-Center
Type
Installation guide

This manual is also suitable for

1© Midmark Corporation 2005
003-1540-00 Rev. (B)
Filler Panel Installation
For models:
All Midmark 3” Casework
All Ritter 3” Casework
Bracket
Wood Screws
Midmark
Fastener
Filler
Panels
Overhead
Cabinet
Note
If filler panels will be attached to
left side of unit, nutserts will need
to be installed into the connector
holes. (Special nutsert installation
tool necessary, cotact Midmark for
information.)
Left Side of
Overhead
Cabinet
Nutsert Installa-
tion Tool
Installation
Step 1:
Attach all cabinets together
and temporarily hang in
place so filler panel size can
be determine.
Installation
Step 3:
Cut filler panels to size and attach
to brackets with #10 x 1/2” wood
screws provided.
OVERHEAD UNITS
Installation
Step 2:
Remove end cabinet(s) and
position so access is avail
able to side of unit. Attach
brackets to side using
Midmark fasteners into
connector holes. (For left
hand filler, see note below.)
Note
May need to cut filler panels to fit
space (See Step 3).
Style A
2
© Midmark Corporation 2005
Wood Screw
Midmark Fastener
Brackets
Filler Panels
Left Side of
Base Unit
Nutsert
Installation
Tool
Installation
Step 1:
Attach all cabinets together
and temporarily position in
place so filler panel size can
be determine.
Installation
Step 3:
Cut filler panels to size and attach
to brackets with #10 x 1/2” wood
screws provided.
BASE UNITS
Note
If filler panels will be attached to
left side of unit, nutserts will need
to be installed into the connector
holes. (Special nutsert installation
tool necessary, cotact Midmark for
information.)
Midmark Corporation
60 Vista Drive
Versailles, OH 45380-0286
937-526-3662
Fax 937-526-5542
midmark.com
Installation
Step 2:
Position cabinets so access is
available to side of unit. Attach
brackets to side of base cabinet
using Midmark fasteners into
connector holes. (For left hand
filler, see note below.)
Note
May need to cut filler panels to fit
space (See Step 3).
  • Page 1 1
  • Page 2 2

Midmark Integra™ Sterilization Cabinetry - Steri-Center Installation guide

Integra™ Sterilization Cabinetry - Steri-Center
Midmark
Brand
Midmark
Model
Integra™ Sterilization Cabinetry - Steri-Center
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents