Midmark Procenter Systems Installation guide

Procenter Systems
Midmark
Brand
Midmark
Model
Procenter Systems
Category
Sanitary ware
Type
Installation guide

Midmark Procenter Systems, designed for dental professionals, offer advanced features to enhance your workflow and patient care. The cuspidor, conveniently mounted on the Elevance Chair, provides easy access for rinsing and expectoration. The system's intuitive controls include a cup fill button and adjustment knob, allowing you to customize the water volume dispensed. Additionally, the bowl flush button ensures effective cleaning after each use.

Midmark Procenter Systems, designed for dental professionals, offer advanced features to enhance your workflow and patient care. The cuspidor, conveniently mounted on the Elevance Chair, provides easy access for rinsing and expectoration. The system's intuitive controls include a cup fill button and adjustment knob, allowing you to customize the water volume dispensed. Additionally, the bowl flush button ensures effective cleaning after each use.

1
© 2010 Midmark Corp. | 60 Vista Drive Versailles, OH 45380 USA | 1-800-643-6275 | 1-937-526-3662 |
003-2034-00 Rev. B (3/28/12)
Procenter Cuspidor, Console Mounted on an Elevance
Chair Installation Guide
Note
Cuspidor is wrapped and sealed in a box to protect the glass. Carefully inspect parts before installing.
Outside cover lip ts under
console top, then push in
until ball studs snap into
ttings in frame.
Inside cover lip ts under
console frame and is secured
with screw on bottom.
Step 2: Slide trim ring onto the cuspidor
mounting post, feed tubing through
opening and slide mounting post
into console bearing.
Trim ring
Console bearing rotational
tension “drag” adjustment
set screw
Cuspidor
mounting
post
Jumper Harness
Ground
Wire
Language of origin: English
WARNING
Always disconnect power before removing covers. Failure to do
so may result in personal injury.
Step 1: Remove the console covers.
Caution
Connect ground wire to ensure system
ground continuity. Failure to do so may
result in electric shock.
Step 3: Connect the jumper harness to the
cuspidor wire harness and attach
the ground wire to the console frame.
NextNext
BackBack
midmark.com
Style G
2
© 2010 Midmark Corp. | 60 Vista Drive Versailles, OH 45380 USA | 1-800-643-6275 | 1-937-526-3662 |
DA137300i
Install the Cuspidor
Step 1: Position the Cuspidor over the base
and gently press downward.
Step 2: Install faucet and gasket.
Step 3: Install bowl flush spout
and gasket.
Step 4: Install gold drain trap.
NextNext
BackBack
midmark.com
Style G
3
© 2010 Midmark Corp. | 60 Vista Drive Versailles, OH 45380 USA | 1-800-643-6275 | 1-937-526-3662 |
4
0
6
0
80
100
2
0
0
1
2
3
5
6
7
4
0
4
0
6
0
80
100
20
0
1
2
3
5
6
7
4
0
40
60
80
100
20
0
1
2
3
5
6
7
4
0
Step 1: Remove the J-box lid.
Step 2: Remove plug from the water shut off valve
and install a 1/4" barb fitting there.
Connect 1/4" blue tubing from umbilical.
Step 3: Connect 5/8" smooth tubing from umbilical
to facility drain.
Note: The 5/8" RIBBED tubing is for an optional Assistant’s Unit.
Connect the Cuspidor tubing in the J-Box
NextNext
BackBack
midmark.com
Style G
Color Page
4
© 2010 Midmark Corp. | 60 Vista Drive Versailles, OH 45380 USA | 1-800-643-6275 | 1-937-526-3662 |
Cuspidor Tubing Layout
KA968102i
Step 1: Remove Jumper Wire and
connect the wire harness.
Step 2: Connect drain tube from cuspidor
to 5/8" smooth tubing from
umbilical.
Step 3: Connect 1/4" blue tubing.
Step 4: Cut 1/8" yellow tubing.
Insert T-fitting with tubing.
Connect 1/8" yellow tubing
from cuspidor.
NextNext
BackBack
midmark.com
Style G
Color Page
5
© 2010 Midmark Corp. | 60 Vista Drive Versailles, OH 45380 USA | 1-800-643-6275 | 1-937-526-3662 |
Cuspidor Control Buttons
KA938903i
Cup Fill Button
Cup Fill
Adjustment
Knob
Increase Fill
volume
Decrease Fill
volume
Bowl Flush
Button
NextNext
BackBack
midmark.com
Style G
6
© 2010 Midmark Corp. | 60 Vista Drive Versailles, OH 45380 USA | 1-800-643-6275 | 1-937-526-3662 |
Installation Checklist
Test Verify the following:
1 Pressing Cup Fill button activates the Cup Fill function.
2
Pressing and holding the Cup Fill button runs water
thru the spout, until button is released.
3
Turning the Cup Fill Adjustment Knob allows you to
modify the amount of water the Cup Fill function
delivers.
4
There are no leaks in the fill or drain connections or
tubing.
NextNext
BackBack
midmark.com
Style G
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Midmark Procenter Systems Installation guide

Procenter Systems
Midmark
Brand
Midmark
Model
Procenter Systems
Category
Sanitary ware
Type
Installation guide

Midmark Procenter Systems, designed for dental professionals, offer advanced features to enhance your workflow and patient care. The cuspidor, conveniently mounted on the Elevance Chair, provides easy access for rinsing and expectoration. The system's intuitive controls include a cup fill button and adjustment knob, allowing you to customize the water volume dispensed. Additionally, the bowl flush button ensures effective cleaning after each use.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents