![](//vs1.manuzoid.com/store/data-gzf/08f1e368a04efb10c3ff5ac91868511a/2/002228627.htmlex.zip/bg1.jpg)
NOTE! All LED tapes must be connected to a 12 V or 24 V power supply.
IMPORTANT: Not all possible mounting procedures are presented here.
More mounting procedures and related accessories can be found at www.KlusDesign.eu.
Drawings in these instructions are simplied and only approximate the actual shapes.
www.KlusDesign.eu 1
MIFOR-70 – instruction for suspending and connecting modules
1. Shape module in the MIFOR-70 system
2. Blanking wall
3. Connector
4. Diuser
5. Diuser connector
6. Fastener
7. Ceiling bracket
8. Nut
9. Wire with clip
1.
3.
4.
2.
5.
1.
6.
7.
8.
9.