KLUS C3059 User manual

NOTE! All LED tapes must be connected to a 12 V or 24 V power supply.

IMPORTANT: Not all possible mounting procedures are presented here.

More mounting procedures and related accessories can be found at www.KlusDesign.eu.

Drawings in these instructions are simplied and only approximate the actual shapes.

www.KlusDesign.eu 1

GLAZA-DUO – mounting instructions

1. GLAZA-DUO prole

2. Gland

3. Connector

4. LED tape

5. OS22-DUO-LIN-Z fastener

5.1 Blockade

5.2 Threaded hook

5.3 Conductor

5.4 Base

5.5 Head

5.6 Pressure screw

5.7 Spare conductor

6. Cover

7. Wire

8. Ceiling fastener

NOTE! The lifting capacity of a single fastener

is 5 kg. Designing multi-level lighting

installations should take into account the weight

of individual xtures and choose the number

of fasteners accordingly.

4.

2.

8.

1.

3. 4.

5.

6.

7.

5 kg

++

__

5.1

5.2 5.2 5.3

5.3

5.4

5.5 5.5

5.6 5.6

5.7

3.

www.KlusDesign.eu 2

GLAZA-DUO – mounting instructions

I

1.

2.

3.

www.KlusDesign.eu 3

GLAZA-DUO – mounting instructions

II

++

__

++

__

++

__

++

__

4.

www.KlusDesign.eu 4

GLAZA-DUO – mounting instructions

III

5.

++

__

5.5

5.1

www.KlusDesign.eu 5

GLAZA-DUO – mounting instructions

6.

IV

www.KlusDesign.eu 6

GLAZA-DUO – mounting instructions

In case of damaged fastener’s connector, unfold

it for parts and replace damaged item.

Each fastener comes with a spare connector,

included in set.

After tightening the fastener’s pressure screw,

do not tighten or unscrew its head!

This will damage the connector.

7. 7.

5.7

5.6 5.6

V

230 V AC / 120 V AC

12 V / 24 V

www.KlusDesign.eu 7

GLAZA-DUO – mounting instructions

++

__

8.

VI

www.KlusDesign.eu 8

GLAZA-DUO – mounting instructions

OPTIONAL: PROPOSAL OF SUSPENDED FIXTURES CONFIGURATION.

++

__

KLUS C3059 User manual

KLUS C3059 User manual

Related papers

Other documents