2. motionics
  3. WiMER1

motionics WiMER1 User guide

  • Hello! I've reviewed the user guide for the Motionics WiMER1+ Wireless Measurement Reader. This document details how to use the device with Mitutoyo instruments, including features like the tri-color LED indicator and the external antenna. I'm ready to answer your questions about setting up and using the WiMER1+.
  • How do I turn off the WiMER1+?
    What should I do if the WiMER1+ is not working?
    What does the Tri-Color LED indicate?
    What is the purpose of the trigger connector?
Wireless Measurement Read
WiMER1+ - User Guide
Important Notes
!
Description
1
2
3
4
5
6
Product Page
Do NOT open the device. Opening causes permanent damage and voids
the warranty.
Turn o the device after use. It will NOT turn o automatically.
10-Pin Connector – connects to Mitutoyo Digimatic data cable
Tri-Color LED
– Device is on
– Device is charging
– Device is fully charged
USB Port – connects to USB cable to charge
Trigger Connector – 2.5 mm audio port, connects to trigger switch
1
2
3
4
5
Antenna – increases WiMER1+ Range
6
push on and push o
iOS: MultiGage Reader (download for FREE from the App Store)
Android: MultiGage Reader (download for FREE from the Play Store)
Windows: MultiGage Reader (BLE dongle required, download for FREE from
www.motionics.com Go to Resources > Download > Software)
MultiGage Reader App
iPhone/iPad MultiGage Reader APP
Android
Motionics, LLC www.motionics.com [email protected]
© 2023 Motionics, LLC All Rights Reserved. Made in the U.S.A.
Compatible Software
In the main page
Quick Start
Included in the box
WiMER1+ Base 1X
Trigger Switch 1X
USB Charging Cable 1X
USB Power Adapter 1X
User Guide 1X
External Antenna 1X
Turn on WiMER1+ and connect to Mitutoyo instruments.
Plug in USB Bluetooth dongle if using Windows PC.
Run one of the aforementioned apps/software.
, tap o bring up a new pairing page.
Connection may take a few seconds, once paired, instrument reading shows in
the software.
Scan/+ button t
Install external antenna on WiMER1+.
Wait for the software to nish scanning nearby devices, select WIMERXXX
to connect.
/