motionics WLRF User guide

WLRF
Brand
motionics
Model
WLRF
Type
User guide
Wireless Laser Rangender
WLRF User Guide
Motionics, LLC www.motionics.com [email protected]
8500 Shoal Creek Blvd Building 4 Suite 209, Austin, TX, 78757
© 2018 Motionics, LLC. All rights reserved. Made in the U.S.A
Important Notes
!
Turn o the device after use. It will NOT turn o automatically.
Do NOT open the device. Opening causes permanent damage and voids
the warranty.
Do NOT stare directly into the apertures of the laser.
Description
Included in the box
Compatible Software
Quick Start
iOS: MultiGage Reader
iOS App can be directly downloaded from the App Store for FREE.
WLRF Base 1X
USB Charging Cable 1X
USB Power Adapter 1X
User Guide 1X
Turn on your WLRF.
Run MultiGage Reader App on iPhone or iPad.
In the main page, tap + button to bring up a new pairing page.
Wait for the software to nish scanning nearby devices, select WLRFXXX
to connect.
Connection may take a few seconds, once paired, instrument reading
shows in the software.
To activate angle reading, tap More-Setting and toggle activation switch
for angle measurement.
Select corresponding angle based on device rotation direction as
illustrated below.
To view sensor status and change data update rate, tap device name
WLRFXXX in the main page.
Antenna
Charge Port – connect to USB power adapter via provided USB to barrel
cable to charge WLRF
On/O Button – press to turn WLRF on/o
Tri-Color LED
– Device is on
– Device is in charge
– Device is fully charged
Laser Sensor
Mounting Hole – remove the cap screw and connect to a tripod or other
mounting system with 1/4-20 thread
1
5
4
1
3
2
6
2
3
4
5
6
Angle 1 Angle 2 Angle 3
  • Page 1 1

motionics WLRF User guide

WLRF
Brand
motionics
Model
WLRF
Type
User guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents