2. Motionics LLC
  3. Shale Shaker Vibration Analysis Kit

Motionics LLC Shale Shaker Vibration Analysis Kit User guide

  • Hello! I've reviewed the user guide for the Motionics Shale Shaker Kit. This guide describes a specialized iPad-based vibration analysis system for shale shakers, including details on its components, setup, and app usage. I'm ready to answer your questions about the device and its functions, including the usage of included Shale Shaker, iVibraMeter and VibraTestPro Apps.
  • What is the main purpose of the Shale Shaker Vibration Analysis Kit?
    How many accelerometers are included in the kit?
    What apps can be used for vibration analysis?
    Is system calibration required?
8500 Shoal Creek Blvd Bldg 4 Suite 209 Austin TX 78757 USA
+1(205) 264-1896 www.motionics.com [email protected]
Shale Shaker Vibration Analysis Kit
User Guide
Description
Motionics shale shaker vibration analysis kit is an iPad-based vibration analyzer specialized
for shale shakers. The two accelerometers in the kit can be attached to a test point to
measure 2-direction vibrations. Accelerometer signals are acquired through the 2-Channel
DAQ box mounted on the back of an iPad and passed to the Shale Shaker App through iPad
lightning port. In the Shale Shaker App, users can see 2-Channel vibration spectrum,
waveform and G Motion X-Y orbit plot. Vibration peak values or RMS values can be recorded
and saved to a test report.
Included in the Package:
• Accelerometer with coiled cable 2x
• Accelerometer magnetic base 2x
• 2-Channel DAQ box (integrated on the iPad cover) 1x
• Protective carrying case 1x
• Shale Shaker App 1x
(iPad App to analyze the vibration and motion of an industrial shale shaker through
accelerometer inputs)
• iVibraMeter App 1x
(ISO-10816 based overall vibration evaluation tool on iPad)
• VibraTestPro App 1x
(iOS App to evaluate vibration severity and view vibration spectrum on iPhone/iPad)
Quick Start
1. Attach the iPad cover with DAQ box to the back of the iPad
2. Connect the accelerometers to the DAQ box
3. Plug in the lightning cable of the DAQ box to the lightning port of the iPad
4. Attach the accelerometers to the testing machine
5. Launch an App to start testing
• For shaker vibration test, please use Shale Shaker App
• For general vibration test, please use iVibraMeter or VibraTestPro
6. If it’s first time use, calibrate the system from the Setting of the Apps. You need a 1G
standard shaker for calibration. Also, you can restore the system to the last calibration
status by entering the calibration value included in the package.
Note that in Shale Shaker App calibration should be done for each channel separately
with individual accelerometer. You can save the accelerometer serial number in the
calibration page after each channel calibration value for future reference since the same
accelerometer should be used with each channel.
/