ITC 69540KK-FF User manual

69540KK-FF
ITC
Brand
ITC
Model
69540KK-FF
Type
User manual

ITC 69540KK-FF is a Navi Night Light that combines intelligent features with energy efficiency to provide convenient and safe lighting solutions. With adjustable light output (100% or 50%) and timing options (1 or 3 minutes), it adapts to your specific needs. The built-in photo sensor ensures it automatically turns on in low-light conditions, providing guidance in dimly lit areas. Installation is simple, requiring a standard 2" x 4" outlet box and basic wiring.

ITC 69540KK-FF is a Navi Night Light that combines intelligent features with energy efficiency to provide convenient and safe lighting solutions. With adjustable light output (100% or 50%) and timing options (1 or 3 minutes), it adapts to your specific needs. The built-in photo sensor ensures it automatically turns on in low-light conditions, providing guidance in dimly lit areas. Installation is simple, requiring a standard 2" x 4" outlet box and basic wiring.

3030 Corporate Grove Dr.
Hudsonville, MI 49426
Phone: 616.396.1355
itc-us.com
Safety/Installation Considerations
• Disconnect power before installing, adding or changing any component.
• This light must be installed according to the National Electrical Code and local building codes.
• To avoid a hazard to children, account for all parts and destroy all packing materials.
• Installation of this product should be completed by a qualified electrician.
• There are no user-serviceable parts inside. Opening unit will void warranty.
1. Before installing the light determine the desired light level and timing. The red box on the back allows
selection of 100% or 50% light output and 1 or 3 minute timing. The timing is how quickly the light will
turn off when no movement is sensed. If desired the timing function may be turned off and the light will
remain on all the time. For this option, simply turn both timing options to the off position. The photo
sensor will still function based on available light conditions.
PARTS / TOOLS NEEDED:
Navi Night Light Mounting Screws (x2) Power Drill Jigsaw Junction Box
(not provided)
2. The night light will install in an existing standard 2” x 4” outlet box.
Install the junction box according to the manufacturers
instructions for either new or existing construction applications.
100% 50% 3MD 1MD
□ □ □ □
LIGHT TIME
□ □ □ □
OFF OFF OFF OFF
For warranty information please visit www.itc-us.com/warranty-return-policy
Rev C • 06/24/22
Page 1 of 2
INSTALLATION INSTRUCTIONS
Navi Light
Part#: 69540KK-FF
3030 Corporate Grove Dr.
Hudsonville, MI 49426
Phone: 616.396.1355
itc-us.com
4. Insert the light into the outlet box and attach using the provided screws.
5. Press cover plate onto light until it snaps in place.
3. Pull the buildings wiring through the outlet box and attach the black wire (Load (L)) with the black wire
on the light. Attach the white wire (Neutral (N)) with the white wire on the light.
Navi
Light Neutral (N)
Load (L)
Incoming
AC Power
(110V - 277V)
For warranty information please visit www.itc-us.com/warranty-return-policy
Rev C • 06/24/22
Page 2 of 2
  • Page 1 1
  • Page 2 2

ITC 69540KK-FF User manual

69540KK-FF
ITC
Brand
ITC
Model
69540KK-FF
Type
User manual

ITC 69540KK-FF is a Navi Night Light that combines intelligent features with energy efficiency to provide convenient and safe lighting solutions. With adjustable light output (100% or 50%) and timing options (1 or 3 minutes), it adapts to your specific needs. The built-in photo sensor ensures it automatically turns on in low-light conditions, providing guidance in dimly lit areas. Installation is simple, requiring a standard 2" x 4" outlet box and basic wiring.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents