superbrightleds WSR-LRR User manual

WSR-LRR
Brand
superbrightleds
Model
WSR-LRR
Type
User manual
LED-Ready Mini Wall Sconce
Important: Read all instructions prior to installation. WSR-LRR
4400 Earth City Expy, St. Louis, MO 63045 866-590-3533 superbrightleds.com
Rev Date: V1 02/18/2022
5yr
User Manual
Wiring Diagram
Installation
Safety and Notes
Model WSR-LRR
Compatible Bulb Type MR16 (GU5.3 base)
Environmental Rating Suitable for wet locations
• Product should be installed and serviced in accordance with applicable national,
state, and local building and electrical codes.
• To reduce the risk of electric shock, ensure that the main power source and circuit
breakers are switched o before performing any installation or wiring procedures.
• Avoid looking directly into lamp when illuminated.
• Ensure all mounts are securely attached and will support the weight of the xture.
Failure to properly support xture may result in damage or injury, for which the
manufacturer does not assume responsibility.
• Connect to voltage corresponding to the bulb used with the xture.
Specications
1. Remove supply power from circuit.
2. Remove the two nuts holding the mounting plate to the light.
3. Run wiring through strain relief and connect to terminal block.
4. Attach mounting plate to desired surface.
5. Reattach light to mounting plate.
6. Unscrew lens and install compatible bulb.
7. Reattach lens.
8. Restore supply power.
Positive
Negative
Positive
Terminal Block
Low Voltage Connection
Negative
  • Page 1 1

superbrightleds WSR-LRR User manual

WSR-LRR
Brand
superbrightleds
Model
WSR-LRR
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents