Herman Miller Asari Chair by Herman Miller Product Instructions

Type
Product Instructions
HermanMiller Asari Chair Installation Assembly Instructions1BW25Z rev A1
Parts Included
HermanMiller
Asari (Nuance) Back Replacement
Instruction Manual
How to Replace Back for Asari (Nuance) Chair
Step 2:
Detach the cover.
Step 1:
Remove T-25 Screw using a power driver.
Tools Required
J Bar Cover
13 mm Hex Bolt
Power Drive Torque Wrench T-25 Bit 13 mm Socket
HermanMiller Asari Chair Installation Assembly Instructions1BW25Z rev A2
Step 4:
Detach the back from the chair.
Step 3:
Remove the 13mm bolts from the Jbar using power drive.
Step 6:
Complete the installation by placing the J bar cover in place and securing
with T-25 Screw. Torque T-25 screw to 20 in-lbs.
Step 5:
Replace the new back to the chair and secure with the three hex bolts.Torque
to 355 in-lbs. Make sure the back is aligned equal distance with all the holes
in the chair before xing tight.
  • Page 1 1
  • Page 2 2

Herman Miller Asari Chair by Herman Miller Product Instructions

Type
Product Instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI